Clutch Problem Prairie 300

honda4life10 · 01-27-2010, 07:35 PM

Hey does anyone have any pointers for me on where to go next. I have a 99 prairie 300 4x4. The secondary clutch fell apart and the primary clutch wore to the point where I bought a new aftermarket one and a used secondary clutch with 1,000 miles on it. I can't get my machine to go over 30 now. I put the old secondary cutch back on and its even worse the belt engages bad huge clanging noise. Could the aftermarket primary one not be working right or are there other things i should check for on my secondary?

brute650i · 01-27-2010, 08:47 PM

Did you torque the bolts to the right specs?

honda4life10 · 01-28-2010, 07:38 AM

Yea i torqued all the bolts to spec. I used new bolts for the main center one that holds the clutch to the machine and thats to spec as well. I read the manual and went through the secondary clutch arording to the manual for size and wear of all the parts in the secondary and they all check out ok.

01-27-2010, 07:35 PM	#1
honda4life10 Junior Member Feedback Score: 0 reviews Join Date: Jan 2010 Location: Gleason WI Posts: 3 (0)	Clutch Problem Prairie 300 Hey does anyone have any pointers for me on where to go next. I have a 99 prairie 300 4x4. The secondary clutch fell apart and the primary clutch wore to the point where I bought a new aftermarket one and a used secondary clutch with 1,000 miles on it. I can't get my machine to go over 30 now. I put the old secondary cutch back on and its even worse the belt engages bad huge clanging noise. Could the aftermarket primary one not be working right or are there other things i should check for on my secondary?

01-27-2010, 08:47 PM	#2
brute650i Senior Member Feedback Score: 0 reviews Join Date: Jan 2009 Posts: 429 (0)	Did you torque the bolts to the right specs? __________________ 2006 FCP Brute Force 801 dynatek cdi full big gun nitrous wet kit stock clutching for now but working on it

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
clutch problem	marcus	Kawasaki Tecate	5	07-03-2009 03:48 AM
02 650 Prairie Clutch problem	tomhusker	Kawasaki Brute Force/Prairie/Bayou	4	04-23-2009 06:12 AM
clutch problem	murph1411	Interstate Motorsports	41	05-26-2008 10:32 AM
Clutch Problem ?	oshy	Kawasaki Brute Force/Prairie/Bayou	6	03-08-2007 11:29 AM
module problem or clutch/belt/ jetting problem ?HELP!!!!!	sdteb	Kawasaki Brute Force/Prairie/Bayou	4	09-28-2003 09:27 AM

01-28-2010, 07:38 AM	#3
honda4life10 Junior Member Feedback Score: 0 reviews Join Date: Jan 2010 Location: Gleason WI Posts: 3 (0)	Yea i torqued all the bolts to spec. I used new bolts for the main center one that holds the clutch to the machine and thats to spec as well. I read the manual and went through the secondary clutch arording to the manual for size and wear of all the parts in the secondary and they all check out ok.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)