Silver protection

Brutegirl · 03-25-2008, 11:33 AM

yesterday Nando was cleaning my quad, as a good husband suppose to do, and while cleaning under the
plastic at the back, there was a lot of mud under some silver thick paper, well it start tearing with the wash and Nando tore it off,I think it was something important, and maybe to do with the exhaust heat, please help and tell me what we can put there that will do the same as what was taken off.

h34r:

TSprairie700 · 03-25-2008, 11:36 AM

heat tape for exhaust.....can get it at any hardware store.

DonkeyKong · 03-25-2008, 11:36 AM

It a heat sheild.I can buy it just about at any parts place around here but I am not sure about down where your at.

Mine feel off the Brute and I didnt worry about it except on the gas tank shield.

Kfxnando · 03-25-2008, 11:48 AM

@ BG, so you see it can stay off, besides you dont ride it hard enough to build up enough heat, so it can stay off

Eforce13 · 03-25-2008, 03:12 PM

Was it kinda a clear plastic film that peeled off underneath the plastic?

I know on the IG plastic there is a film that will come off the underside of the fenders but doesnt heart anything.

Brutegirl · 03-29-2008, 05:13 AM

Quote:

heat tape for exhaust.....can get it at any hardware store.
[/b]

that is just what it is, thanks for all the help, and I am sure I will get some here by our
quad shops, Nando say he is not putting on again as I do not ride fast enough, the fastest I have gone with my GREEN monster is 67mph, do you guys think I need it on?

Kfxnando · 03-29-2008, 05:20 AM

the only reason why you went so fast was due to my V towing your BF

dont worry, if I start seeing signs of melting plastics, then will just glue some tinfoil on there.

till then, just ride it and enjoy it!!

or

how about this, if it melts your plastics then I will fit a full system exhaust on there for you!! to take the attention away from the melted plastics!!!

hows that sound!!??????

03-25-2008, 11:33 AM	#1
Brutegirl Senior Member Feedback Score: 0 reviews Join Date: May 2007 Posts: 129 (0)	yesterday Nando was cleaning my quad, as a good husband suppose to do, and while cleaning under the plastic at the back, there was a lot of mud under some silver thick paper, well it start tearing with the wash and Nando tore it off,I think it was something important, and maybe to do with the exhaust heat, please help and tell me what we can put there that will do the same as what was taken off. h34r: __________________ MAY THE FORCE BE WITH YOU '05 Honda TRX250TM - First quad (18 months) '07 BF (Kawi green) - 2" spaces, aftermarket rims, Garming GPS,Garfield stickers, utility bag

03-25-2008, 11:36 AM	#2
TSprairie700 Senior Member Feedback Score: 0 reviews Join Date: Jul 2006 Location: crown city, ohio Posts: 1,124 (0)	heat tape for exhaust.....can get it at any hardware store. __________________ up next...???? 03 prairie 650...stage 2's, high comps, muzzy 08 RED TERYX sold 06 team green prairie sold

03-25-2008, 11:36 AM	#3
DonkeyKong Senior Member Feedback Score: 0 reviews Join Date: Mar 2007 Location: Parkersburg,WV Posts: 5,149 (0)	It a heat sheild.I can buy it just about at any parts place around here but I am not sure about down where your at. Mine feel off the Brute and I didnt worry about it except on the gas tank shield. __________________ WVSwampDonkey now know as DonkeyKong

03-25-2008, 11:48 AM	#4
Kfxnando Senior Member Feedback Score: 0 reviews Join Date: Apr 2007 Location: South Africa Posts: 2,568 (4)	@ BG, so you see it can stay off, besides you dont ride it hard enough to build up enough heat, so it can stay off __________________ KFX700(fast green) wheel spacers, nerf bars, full hydedevelopments bash plates, Trail Teck Vapour, motor internal stock, PENTA 2 into 1 pipe(equal length headers), twin air filter element. BF750 - 2inch spacers all round TRX250TM FZR1000 EX-UP yoshi, BMC filter 155bhp http://community.webshots.com/user/kfxnando http://www.youtube.com/kfxnando

03-25-2008, 03:12 PM	#5
Eforce13 Senior Member Feedback Score: 0 reviews Join Date: Jan 2006 Location: Haughton, LA Posts: 3,500 (0)	Was it kinda a clear plastic film that peeled off underneath the plastic? I know on the IG plastic there is a film that will come off the underside of the fenders but doesnt heart anything. __________________ My Marble White V: K&N filters w/Outerwear, AMR CDI, AMR Racing coils, Dalton OR/BL Spring, VFJ stage 2 Clutch , DPK 58g weights, Titanium Clutch cover bolts, Muzzy Exhaust - Jet-Hot Extreme Coated, PRM Desert Grab, Kawie Front Bumper, IMS Foot Pegs & Heel Guards, AC Nerf Bars, Maier CF Scoop Hood, Kawie Gripper Seat Cover, Royal Purple 15-W40 Motor Oil, ESR Temp Gauge, Crankcase Vent Mod, Fluidyne Radiator, Two Aluminum In-Line Coolers, LED Tail Light, Precision steering stabilizer, Maxxis Razr 2's on Black C-Series rims, 24" Extremes 9 Paddle & 21" Buffed Mohawks on Polished C-Series rims, 22" Innova Racers (rims undecided), ASR SS +2" Brake Lines, ASR +2" A-Arms & Tie Rods, All Ball's Racing Tie Rod End's, Durablue 2"+2" Eliminator Axle, G-Force +3.5" Extended Hubs, Houser Black +2" steering stem & Anti-vibe Fat Bar Mounts, Black Pro Taper Couture Fat Bars, Elka's Race Front & Rear, FPS800 BBK, Nikasil cylinders, Fully ported, Trail/Race cams, 36mm F4 carbs , UPP 36mm Intakes, Braided Fuel lines, Black & Silver IMS Powermadd Star Hand Guards, LC1 Digital Air/Fuel Gauge, Polished Shorty Shifter, Moose Billet Throttle, Ven's +4" Swing arm Ext., Everything powdercoated Black & White, Dyno Tuned @ 64.5 RWHP

03-29-2008, 05:13 AM	#6
Brutegirl Senior Member Feedback Score: 0 reviews Join Date: May 2007 Posts: 129 (0)	Quote: heat tape for exhaust.....can get it at any hardware store. [/b] that is just what it is, thanks for all the help, and I am sure I will get some here by our quad shops, Nando say he is not putting on again as I do not ride fast enough, the fastest I have gone with my GREEN monster is 67mph, do you guys think I need it on? __________________ MAY THE FORCE BE WITH YOU '05 Honda TRX250TM - First quad (18 months) '07 BF (Kawi green) - 2" spaces, aftermarket rims, Garming GPS,Garfield stickers, utility bag

03-29-2008, 05:20 AM	#7
Kfxnando Senior Member Feedback Score: 0 reviews Join Date: Apr 2007 Location: South Africa Posts: 2,568 (4)	the only reason why you went so fast was due to my V towing your BF dont worry, if I start seeing signs of melting plastics, then will just glue some tinfoil on there. till then, just ride it and enjoy it!! or how about this, if it melts your plastics then I will fit a full system exhaust on there for you!! to take the attention away from the melted plastics!!! hows that sound!!?????? __________________ KFX700(fast green) wheel spacers, nerf bars, full hydedevelopments bash plates, Trail Teck Vapour, motor internal stock, PENTA 2 into 1 pipe(equal length headers), twin air filter element. BF750 - 2inch spacers all round TRX250TM FZR1000 EX-UP yoshi, BMC filter 155bhp http://community.webshots.com/user/kfxnando http://www.youtube.com/kfxnando

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Good Skid protection	BossMan	Kawasaki Brute Force/Prairie/Bayou	3	09-22-2007 06:09 PM
BRUTE PROTECTION	Brutegirl	Kawasaki Brute Force/Prairie/Bayou	18	06-08-2007 02:42 PM
Back protection...What do you use?	KTM265	Club Kawie	27	10-03-2006 09:52 PM
Protection for ur Wench ;-D	Sarge	Kawasaki Brute Force/Prairie/Bayou	10	08-17-2004 12:56 PM
Back protection...What do you use?	KTM265	Kawasaki KFX700 V-Force	0	12-31-1969 06:00 PM