Mods you've done to your Quad

sdrider · 02-02-2007, 09:48 PM

Just wondering how you made that pro armor bumper shine. Been trying to shine mine up but I cant get it to look that good.

scottbebadboy · 02-02-2007, 10:58 PM

Quote:

Just wondering how you made that pro armor bumper shine. Been trying to shine mine up but I cant get it to look that good.
[/b]

Mother's Wheel Cleaner (Autozone), Rags, and alot of elbow grease.

**Sully** · 02-19-2007, 12:52 PM

Swing Arm Bearing Protection

Use a VW Golf II wheel hub cover. The Part number is 823 501 249. You can fill a little bit grease inside the cover. This is for a better protection against water and so on. The cover is a little bit smaller than the hole in the frame. Use some silicone for fixing the cover into the frame.

<div align="center">

painted in silver color</div>

killersaki · 03-29-2007, 06:10 AM

AT THE MOMENT MY BIKE IS CURRENTLY BEING DYNO TUNED TO GET MY TWIN HMF PIPES WITH VECTOR ENDS,JETS & K&N WORKING HARMONIOUSLY SO HERE ARE SOME IN THE BUILD SHOTS SO FAR.i PUT A HOUSER +1 STEM WITH 1 1/8 CLAMP ON WITH PRO TAPER BARS,ALSO HAS A PRECISION STABILIZER,PRO-ARMOUR BAR,NERFS WITH KICKS & LENYARD.

THERE ARE OTHER LITTLE THINGS HERE AND THERE BUT I'LL POST THEM LATER WITH BETTER QUALITY PHOTO'S,IT JUST MY PHONE.

jake_evans420 · 05-03-2007, 07:44 PM

http://i165.photobucket.com/albums/u59/jak...0/kfx700005.jpg

http://i165.photobucket.com/albums/u59/jak...0/kfx700004.jpg

http://i165.photobucket.com/albums/u59/jak...0/kfx700003.jpg

http://i165.photobucket.com/albums/u59/jak...0/kfx700002.jpg

http://i165.photobucket.com/albums/u59/jak...0/kfx700001.jpg

http://s165.photobucket.com/albums/u59/jak...nt=100_0305.flv

HERES SOME PICS OF MY MODS AND A WHEELY

ManicHaze · 07-22-2007, 06:18 PM

Heat Shielded Seat

I did this because I noticed my seat getting really hot. At first I figured it was the sun after parking it for a while and resting, then getting back on to ride. Turns out it did it even if I parked in the shade.

To me this is very uncomfortable and I wanted to find a solution. Then I remembed I had some BeQuiet Extreme (similiar to Dynamat extreme) sound deadener left over from using it in my car. I decided to apply it to the bottom of my seat just to see the results as I know of people using it under their hoods to lower hood temps for ram air applications. I also knew it couldn't hurt to try. Sure enough, I noticed my seat remained much cooler now.

It is very sticky stuff, so it isnt comming off. It has been on there for over a year. I cleaned the seat up really good with alcohol before applying it.

Toddman45 · 08-22-2007, 11:16 AM

V Dragger , please email me @ Todd_LeachMsn.com or toddleach@bayardsalescorp.com
I have a few questions on the 800....

junkman · 08-22-2007, 06:53 PM

Quote:

another version of the catch can off a John Deere G100 like $5 for this mod. including the can best part most Deere dealers can have parts next day

[/b]

COULD YOU TELL ME WHAT DOES THE CATCH CAN MOOD DO??

GWC · 10-15-2007, 02:48 PM

why cover up the factory snorkel hole..?? would it not be best to get that air in as well...????

sdf120101 · 10-19-2007, 11:36 AM

Quote:

why cover up the factory snorkel hole..?? would it not be best to get that air in as well...????
[/b]

The V's just run better with the hole covered up and the 12 hole mod.

02-02-2007, 09:48 PM	#21
sdrider Junior Member Feedback Score: 0 reviews Join Date: Feb 2006 Location: Rapid City ,SD Posts: 11 (0)	Just wondering how you made that pro armor bumper shine. Been trying to shine mine up but I cant get it to look that good. __________________ ----------04 KFX 700 Orange-------- Stock (upgrading this winter)

02-02-2007, 10:58 PM	#22
scottbebadboy Senior Member Feedback Score: 0 reviews Join Date: Oct 2006 Posts: 231 (0)	Quote: Just wondering how you made that pro armor bumper shine. Been trying to shine mine up but I cant get it to look that good. [/b] Mother's Wheel Cleaner (Autozone), Rags, and alot of elbow grease. __________________

02-19-2007, 12:52 PM	#23
Sully Premium Member Feedback Score: 0 reviews Join Date: Jul 2005 Location: Germany Posts: 147 (1)	Swing Arm Bearing Protection Use a VW Golf II wheel hub cover. The Part number is 823 501 249. You can fill a little bit grease inside the cover. This is for a better protection against water and so on. The cover is a little bit smaller than the hole in the frame. Use some silicone for fixing the cover into the frame. <div align="center"> painted in silver color</div> __________________ ........... so long, Sully ..... maybe, use Yahoo babelfish for translation Street legal, long "german" gear ratio -32%, Wilbers SUMO Shocks, IMS, AC-Racing Nervbars, Big V-Force Bumper Full Carbon Protection (Frame, GearBox, A-Arms), 4" Swingarm extension, Full adjustable A-Arms +2" , freely programmable Ignition Master CDI, Presicion Steering Stabilizer

03-29-2007, 06:10 AM	#24
killersaki Junior Member Feedback Score: 0 reviews Join Date: Nov 2006 Location: SYDNEY,AUSTRALIA Posts: 14 (0)	AT THE MOMENT MY BIKE IS CURRENTLY BEING DYNO TUNED TO GET MY TWIN HMF PIPES WITH VECTOR ENDS,JETS & K&N WORKING HARMONIOUSLY SO HERE ARE SOME IN THE BUILD SHOTS SO FAR.i PUT A HOUSER +1 STEM WITH 1 1/8 CLAMP ON WITH PRO TAPER BARS,ALSO HAS A PRECISION STABILIZER,PRO-ARMOUR BAR,NERFS WITH KICKS & LENYARD. THERE ARE OTHER LITTLE THINGS HERE AND THERE BUT I'LL POST THEM LATER WITH BETTER QUALITY PHOTO'S,IT JUST MY PHONE. __________________ RIDE LIKE IT'S THE LAST RIDE YOU'LL EVER HAVE

05-03-2007, 07:44 PM	#25
jake_evans420 Senior Member Feedback Score: 0 reviews Join Date: Apr 2007 Location: Eaton Rapids,MI Posts: 789 (0)	http://i165.photobucket.com/albums/u59/jak...0/kfx700005.jpg http://i165.photobucket.com/albums/u59/jak...0/kfx700004.jpg http://i165.photobucket.com/albums/u59/jak...0/kfx700003.jpg http://i165.photobucket.com/albums/u59/jak...0/kfx700002.jpg http://i165.photobucket.com/albums/u59/jak...0/kfx700001.jpg http://s165.photobucket.com/albums/u59/jak...nt=100_0305.flv HERES SOME PICS OF MY MODS AND A WHEELY __________________ 5TH GEAR PINNED CAUSE GOLF COURSES SHOULD BE MX TRACKS!!!!! Sold the V. Black 94 Mustang GT, conv., crome cobra R rims, drag radials, dual flowmasters, high flow cats, and H-pipe. 06 ZX-6R 636 GPR Stabilizer PICS------> http://s165.photobucket.com/albums/u59/jake_evans420/

07-22-2007, 06:18 PM	#26
ManicHaze Senior Member Feedback Score: 0 reviews Join Date: Apr 2005 Location: Memphis, TN Posts: 435 (0)	Heat Shielded Seat I did this because I noticed my seat getting really hot. At first I figured it was the sun after parking it for a while and resting, then getting back on to ride. Turns out it did it even if I parked in the shade. To me this is very uncomfortable and I wanted to find a solution. Then I remembed I had some BeQuiet Extreme (similiar to Dynamat extreme) sound deadener left over from using it in my car. I decided to apply it to the bottom of my seat just to see the results as I know of people using it under their hoods to lower hood temps for ram air applications. I also knew it couldn't hurt to try. Sure enough, I noticed my seat remained much cooler now. It is very sticky stuff, so it isnt comming off. It has been on there for over a year. I cleaned the seat up really good with alcohol before applying it. __________________ '05 V-Force (Orange) \|\| Dual DMC Aliens \|\| Elka rear shock \|\| 12 hole mod \|\| UNI Filter \|\| Jetted 182/185, shimmed, trimmed & polished\|\| EPI Almond spring \|\| full PRM skids, bumper and rear grab \|\| Powermadd Handguards \|\| Heat shielded seat \|\| Shockwears \|\| ACME Rocket on backorder \|\| '06 Yamaha FZ1 (Red) \|\| 16T Front Sprocket \|\| Speedo-Healer \|\|

08-22-2007, 11:16 AM	#27
Toddman45 Junior Member Feedback Score: 0 reviews Join Date: Aug 2007 Posts: 4 (0)	V Dragger , please email me @ Todd_LeachMsn.com or toddleach@bayardsalescorp.com I have a few questions on the 800....

08-22-2007, 06:53 PM	#28
junkman Junior Member Feedback Score: 0 reviews Join Date: Jul 2007 Posts: 26 (0)	Quote: another version of the catch can off a John Deere G100 like $5 for this mod. including the can best part most Deere dealers can have parts next day [/b] COULD YOU TELL ME WHAT DOES THE CATCH CAN MOOD DO??

10-15-2007, 02:48 PM	#29
GWC Junior Member Feedback Score: 0 reviews Join Date: Oct 2007 Location: Paola, Ks. Posts: 20 (0)	why cover up the factory snorkel hole..?? would it not be best to get that air in as well...???? __________________ <div align="center">2005 AC 500m LE with a few mods. on 29.5" outlaws MY PIX Looking for a 700V force to put here ( ...........................)</div>

10-19-2007, 11:36 AM	#30
sdf120101 Member Feedback Score: 0 reviews Join Date: Jun 2006 Posts: 57 (0)	Quote: why cover up the factory snorkel hole..?? would it not be best to get that air in as well...???? [/b] The V's just run better with the hole covered up and the 12 hole mod.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need more mods	BadazzPrarie	Kawasaki Brute Force/Prairie/Bayou	5	10-16-2007 08:00 AM
Air Box Mods	bb 650	Kawasaki KFX700 V-Force	1	01-01-2007 09:15 AM
Mods 3	gus700	Kawasaki KFX700 V-Force	4	10-28-2006 02:57 PM
Big mods to come	04KFX700	Kawasaki KFX700 V-Force	7	06-29-2005 12:39 AM
FOR SALE: 2005 Suzuki King Quad 700 with Mods.	lancems007	For Sale	7	04-26-2005 05:58 PM