Parting a fresh bike with all the fixins!!

rockhound · 02-06-2010, 08:27 PM

Here's the deal, I have decided to part out the red 330 Tecate. Everything on this bike is BRAND NEW. Here is a rundown of what it has, i plan to offer it up and once i have commitments for 1/2 to 2/3 of the parts, i will take the money and tear down the bike. there are a lot of choice parts here so don't delay on this one as they will go quick. Every bushing, bearing, ball joint is new on this bike. every engine bearing and seal is also new. This bike has many trick parts. Lots of aftermarket parts here, very hard to find goodies here. Every part on this bike is polished, powder coated or chromed.

Fresh 330 long rod by ILR Performance(full dune port, just under 60hp) Long rod rebuilt crank, teflon coated piston, New power valves, Rockhound Motorsports 10mm reed spacer, big carb intake, polished jug and head. electronics are also included
40mm Lectron carb
K&N air filter
+1" aluminum wheel spacers(3 sets)
Dirt tires on black powdercoated wheels
paddles on douglas aluminum
14/42 PBI sprockets and red oring chain
+2" Rockhound Motorsports steering stem
Carbon tech reeds

lots of chrome, pegs, kicker, shifter, brake pedal, axle nuts, shock keepers, front bumper, etc...

Here is a list of all that is left, i will update it daily:
carb
Engine
Pc brake lever and clutch perch/lever
+2" RHMS steering stem(w/anodized red aftermarket upper bar clamp)
front aluminum wheel spacers 1"(3 sets available)
shifter(chrome)
kicker(chrome)
front bumper(chrome)
chain and sprocket set PBI and oring
88 aarms w/new balljoints and pivot bearings/seals
powdercoated spindles
front hubs with brake discs and new bearings
pegs(chrome)
headlight and mechanism
harness with components
front fender support PC
radiator
front PC 87 shocks with chrome keepers
tank and petcock
pc sprocket hub
pc brake hub
R brake assembly
front brake assembly
pc brake stay
PC rear wheel hubs 4 0n 110
pc rear hubs 4 on 156
hoses
taillight
bars pc
white maier rears with very small bubble
white factory fronts
white factory hood
black sides(painted)
air box w/k&n
Frame Pc red with title(and subframe)
white rad shrouds
Rear fender support

Pm me me with what you want/need, and i will get back to you with prices. I will not be tearing the bike down or accepting money until i have a commitment of 1/2 of the parts.

d'stecate4 · 02-06-2010, 08:44 PM

Dibs on the billet gas cap

maloha3 · 02-06-2010, 09:18 PM

On my BB at the moment, pm me with the cost of the axle, billet gas cap if you have another one. Interested in the front shocks but price will depond on whether I can commit. Will reply quick once I get prices. Do you have a pic of the levers, can I find on your site.

maloha3 · 02-06-2010, 09:27 PM

Seperately, I need a rear sprocket hub (think that's what's called) broke mine yesterday trying to get the axle flange off (still didn't get it off) it's like it's welded on. Ah, yes, guess I need a new flange too.

rockhound · 02-06-2010, 09:33 PM

pm sent, here are some pics
http://i55.photobucket.com/albums/g1...T-4/yea013.jpg
http://i55.photobucket.com/albums/g1...T-4/yea017.jpg
http://i55.photobucket.com/albums/g1...T-4/yea002.jpg
http://i55.photobucket.com/albums/g1...wmobile085.jpg
http://i55.photobucket.com/albums/g1...T-4/yea010.jpg
http://i55.photobucket.com/albums/g1...hsbuild036.jpg
http://i55.photobucket.com/albums/g1...hsbuild032.jpg

rockhound · 02-06-2010, 09:44 PM

I'll add the names next to the parts that who has dibbs on so you guys know if she's going down those parts are spoken for...

jonboy · 02-07-2010, 02:28 AM

Damn it! I was hoping to get the gas cap. If D's changes his mine I'm on it. Lol.

**hensons700v** · 02-07-2010, 07:01 AM

I wanna be second in line for the axle

chrome, pegs, kicker, shifter, brake pedal, front bumper
and the aftermarket grab bar

**hensons700v** · 02-07-2010, 07:20 AM

Can you send me a pm with the motor, frame, and subframe price

d'stecate4 · 02-07-2010, 10:31 AM

Quote: Originally Posted by jonboy

Damn it! I was hoping to get the gas cap. If D's changes his mine I'm on it. Lol.

Sorry

no mind changing here.

02-06-2010, 08:27 PM	#1
rockhound Senior Member Feedback Score: 2 reviews Join Date: Feb 2005 Location: Warshington Posts: 1,739 (0)	Parting a fresh bike with all the fixins!! Here's the deal, I have decided to part out the red 330 Tecate. Everything on this bike is BRAND NEW. Here is a rundown of what it has, i plan to offer it up and once i have commitments for 1/2 to 2/3 of the parts, i will take the money and tear down the bike. there are a lot of choice parts here so don't delay on this one as they will go quick. Every bushing, bearing, ball joint is new on this bike. every engine bearing and seal is also new. This bike has many trick parts. Lots of aftermarket parts here, very hard to find goodies here. Every part on this bike is polished, powder coated or chromed. Fresh 330 long rod by ILR Performance(full dune port, just under 60hp) Long rod rebuilt crank, teflon coated piston, New power valves, Rockhound Motorsports 10mm reed spacer, big carb intake, polished jug and head. electronics are also included 40mm Lectron carb K&N air filter +1" aluminum wheel spacers(3 sets) Dirt tires on black powdercoated wheels paddles on douglas aluminum 14/42 PBI sprockets and red oring chain +2" Rockhound Motorsports steering stem Carbon tech reeds lots of chrome, pegs, kicker, shifter, brake pedal, axle nuts, shock keepers, front bumper, etc... Here is a list of all that is left, i will update it daily: carb Engine Pc brake lever and clutch perch/lever +2" RHMS steering stem(w/anodized red aftermarket upper bar clamp) front aluminum wheel spacers 1"(3 sets available) shifter(chrome) kicker(chrome) front bumper(chrome) chain and sprocket set PBI and oring 88 aarms w/new balljoints and pivot bearings/seals powdercoated spindles front hubs with brake discs and new bearings pegs(chrome) headlight and mechanism harness with components front fender support PC radiator front PC 87 shocks with chrome keepers tank and petcock pc sprocket hub pc brake hub R brake assembly front brake assembly pc brake stay PC rear wheel hubs 4 0n 110 pc rear hubs 4 on 156 hoses taillight bars pc white maier rears with very small bubble white factory fronts white factory hood black sides(painted) air box w/k&n Frame Pc red with title(and subframe) white rad shrouds Rear fender support Pm me me with what you want/need, and i will get back to you with prices. I will not be tearing the bike down or accepting money until i have a commitment of 1/2 of the parts. __________________ ILR 330 ILR big bore pipe 44mm Lectron carb chromoly antivibe stem steel braided br lines Trail tech computer Rad bearing carrier Choke on the bars Flame seat cover Stainless bolt kit +2.5" swingarm +3 ilr aarms +4 durablue New plastic ASV levers PVL coil Check it out at http://www.rockhoundmotorsports.com Last edited by rockhound; 02-17-2010 at 01:50 PM.

02-06-2010, 08:44 PM	#2
d'stecate4 Senior Member Feedback Score: 0 reviews Join Date: Nov 2008 Location: Auburn WA Posts: 809 (11)	Dibs on the billet gas cap __________________ crf450 powerd 1988 Tecate, +4+1 a-arms, stock kfx450r front shocks, +1 houser antivibe stem, 2+2 durablue axle, stock revalved rear shock and blingstar propeg nerf bars. 2004 kfx 400, +3 wicked products a-arms with kfx450r front shocks, CRJ adjustable rear linkage, G-Force axle, motor and exhaust all stock. http://www.rockhoundmotorsports.com/ http://www.badgurlzgrafx.com/ http://www.everything2stroke.com/

02-06-2010, 09:44 PM	#6
rockhound Senior Member Feedback Score: 2 reviews Join Date: Feb 2005 Location: Warshington Posts: 1,739 (0)	I'll add the names next to the parts that who has dibbs on so you guys know if she's going down those parts are spoken for... __________________ ILR 330 ILR big bore pipe 44mm Lectron carb chromoly antivibe stem steel braided br lines Trail tech computer Rad bearing carrier Choke on the bars Flame seat cover Stainless bolt kit +2.5" swingarm +3 ilr aarms +4 durablue New plastic ASV levers PVL coil Check it out at http://www.rockhoundmotorsports.com

02-07-2010, 02:28 AM	#7
jonboy Senior Member Feedback Score: 0 reviews Join Date: Oct 2006 Location: Philpot, KY Posts: 337 (0)	Damn it! I was hoping to get the gas cap. If D's changes his mine I'm on it. Lol. __________________ 04 KFX400, Leager A arms,ESW modded 450r shocks,cusdtom Yosh header w/FMF PC4,FCR39, ESR intake,GTT rear link,Tag stem and bars,LSR axel,YFZ450 front calipers. 99 Lakota, DG excellerator,400ex carb,CWR 335 kit,CWR .390 cam,JB custom intake,Crasko P&P head,400ex rear hubs, Modified KFX400 front suspension. 88 Tecate 4 stock Sponsors, JBcustoms,6thPinned Motorsports,Crasko Performance.

02-07-2010, 07:01 AM	#8
hensons700v Premium Member Feedback Score: 1 reviews Join Date: May 2006 Location: OKla Posts: 106 (0)	I wanna be second in line for the axle chrome, pegs, kicker, shifter, brake pedal, front bumper and the aftermarket grab bar __________________ 06 Kfx 700 fst800 stage 2 cams big kev drag pipe 87 Tecate 4 soon to be a 330

02-06-2010, 09:18 PM	#3
maloha3 Member Feedback Score: 0 reviews Join Date: Sep 2009 Location: Denver Posts: 74 (0)	On my BB at the moment, pm me with the cost of the axle, billet gas cap if you have another one. Interested in the front shocks but price will depond on whether I can commit. Will reply quick once I get prices. Do you have a pic of the levers, can I find on your site.

02-06-2010, 09:27 PM	#4
maloha3 Member Feedback Score: 0 reviews Join Date: Sep 2009 Location: Denver Posts: 74 (0)	Seperately, I need a rear sprocket hub (think that's what's called) broke mine yesterday trying to get the axle flange off (still didn't get it off) it's like it's welded on. Ah, yes, guess I need a new flange too.

02-07-2010, 07:20 AM	#9
hensons700v Premium Member Feedback Score: 1 reviews Join Date: May 2006 Location: OKla Posts: 106 (0)	Can you send me a pm with the motor, frame, and subframe price __________________ 06 Kfx 700 fst800 stage 2 cams big kev drag pipe 87 Tecate 4 soon to be a 330

02-07-2010, 10:31 AM	#10
d'stecate4 Senior Member Feedback Score: 0 reviews Join Date: Nov 2008 Location: Auburn WA Posts: 809 (11)	Quote: Originally Posted by jonboy Damn it! I was hoping to get the gas cap. If D's changes his mine I'm on it. Lol. Sorry no mind changing here. __________________ crf450 powerd 1988 Tecate, +4+1 a-arms, stock kfx450r front shocks, +1 houser antivibe stem, 2+2 durablue axle, stock revalved rear shock and blingstar propeg nerf bars. 2004 kfx 400, +3 wicked products a-arms with kfx450r front shocks, CRJ adjustable rear linkage, G-Force axle, motor and exhaust all stock. http://www.rockhoundmotorsports.com/ http://www.badgurlzgrafx.com/ http://www.everything2stroke.com/

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Parting out a very nce bike	rockhound	Kawasaki Tecate	19	10-05-2009 08:58 AM
Parting out a fresh bike	rockhound	Kawasaki Tecate	25	08-25-2009 04:11 PM
fresh meat	warpigg	New Member Introductions	5	08-23-2009 06:13 AM
"parting out new bike"	sfarrar	Kawasaki Tecate	10	08-06-2009 01:54 PM
For Sale: 1989 Kawasaki KX80 KX 80 Engine Motor $200 (Parting out bike)	cyrjordan	For Sale	2	01-01-2009 08:54 PM