Kawasaki ATV Forum

Kawasaki ATV Forum (https://www.kawieriders.com/forum/)
-   Kawasaki KFX700 V-Force (https://www.kawieriders.com/forum/kawasaki-kfx700-v-force/)
-   -   2004 kfx700 fuel pressure at pump (https://www.kawieriders.com/forum/kawasaki-kfx700-v-force/103837-2004-kfx700-fuel-pressure-pump.html)

mykfx700 01-11-2011 08:49 AM

2004 kfx700 fuel pressure at pump
 
I'm trying to figure out a affordable & fast way to get fuel to the carbs.It cut off & the fuel pump isnt running.I checked & it has power to the pump.I thought about an external pump but didnt know if it would pull fuel through the tank unit without modding... Thank you for ANY help....

04hemigtx1990 01-11-2011 12:47 PM

Sounds like you need a new fuel pump. I've got a pump sitting at my house.

mykfx700 01-11-2011 07:39 PM

I read some stuff on here about using an external low pressure pump.I bought 1 today & plummed it up & so far so good.I would like to put it back factory but wasn't able to get a new 1 today.We had some ice on the roads & wanted to play.

T_Dilley 01-11-2011 07:42 PM

Start a thread in the wanted section. I picked my last pump up for around $70 I think

CoopDawg 01-11-2011 11:19 PM

My quad sat for a while and my pump went out as well. put one of the mr. gasket pumps from autozone. It will fire right up and run good but only with the choke wide open. As I start to decrease the throttle i have to keep it running with the thrtottle. If i turn the throttle off all together it wont run regardless. any idea? keep in mind it did sit for about 2.5 yrs

CoopDawg 01-11-2011 11:20 PM

IF i need to clean the carbs do they make readily available carb kits?

04hemigtx1990 01-12-2011 05:22 AM

I have a fuel pump... If you want it i'll let it go for $70

T_Dilley 01-12-2011 05:51 AM

If you need to clean the carbs you won't need a kit. Just disassemble and maybe soak them awhile then scrub/blow out with compressed air

04hemigtx1990 01-12-2011 05:58 AM

If it set for 2.5 years with fuel in the bowls. You can bet that they are gunked.

CoopDawg 01-12-2011 08:20 AM

choke
 
so that could make my carbs only want to run with the choke most of the way open? If they are just o rrings I could start cleaning tonight. Any special does and donts? Ive alreay replaced the screws where you take the jets out wtih hex bolts. What should I concntrate on cleaning?


All times are GMT -7. The time now is 09:50 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome