36mm carb - intake - filter fitment - Kawasaki ATV Forum
Kawasaki KFX700 V-Force Kawasaki's big-bore, V-twin sport machine!

 
LinkBack Thread Tools Display Modes
post #1 of 8 Old 03-05-2012, 06:15 PM Thread Starter
Premium Member
Feedback Score: 24 reviews
 
twyztid's Avatar
 
Join Date: Nov 2007
Location: Grand Rapids, MI
Posts: 10,180
36mm carb - intake - filter fitment

I have a set of 36mm carbs, FST intakes, and K&N filter that I want to try on my 730 this season. The FST intakes look like they hold the carbs much higher than the stock intakes. Will that setup with a tall filter like the GYTR filter fit under the airbox plastic (not the airbox cover... the red plastic over the airbox in my case)? I am using a filter that is as tall as the GYTR filter but is larger length & width because I will be making a custom plate setup for my nitrous.

...
'04 KFX800
DSC 12:1 Pistons w/ Stg 2 cams, Ported Heads, 36mm carbs, Muzzy Super Pro, Dual MTX-L, VFJ Stg 3 Spidermod Clutch & Adj. Weights, +8 Swing Arm, Elka Shocks, 24" 14-paddle Staggered SLS Ripper paddles, BOSS NOSS 40-shot

'04 KFX730
Custom 84mm 12:1 JE Pistons w/ FST Stg 2 cams, Muzzy Super Pro, UPP Crossover Intakes, 8* Timing Key, Elka Shocks, +4 Swing Arm Extension, 24" 10-paddle Skat-Trak Extremes

'04 KFX730
Wiseco 84mm 11.5:1 Pistons w/ Fundy Trail/Race cams, Muzzy Super Pro, Crossover Intakes, 6* Timing Key, Works front & Elka Rear Shocks, +4 Swing Arm Extension, 24" 9-paddle Skat-Trak Extremes

'05 BF730 SRA

'04 Prairie 700
...
...
twyztid is offline  
Sponsored Links
Advertisement
 
post #2 of 8 Old 03-05-2012, 06:25 PM
Senior Member
Feedback Score: 0 reviews
 
diggin riggin's Avatar
 
Join Date: Apr 2010
Location: Augusta, GA
Posts: 1,526
RU-2920 (K&N) is what i'm using. It is short and fits no problem. I tried one from a raptor I used to have and it was too tall. I never tried the gytr.



Prairie 730
KFX FST 820

Last edited by diggin riggin; 03-05-2012 at 06:29 PM.
diggin riggin is offline  
post #3 of 8 Old 03-05-2012, 06:26 PM
Senior Member
Feedback Score: 6 reviews
 
HEATHEN 730's Avatar
 
Join Date: Jun 2004
Location: Michigan
Posts: 8,165
Mine fits

2004 KFX730
2005 KFX700
HEATHEN 730 is offline  
Sponsored Links
Advertisement
 
post #4 of 8 Old 03-06-2012, 06:10 AM Thread Starter
Premium Member
Feedback Score: 24 reviews
 
twyztid's Avatar
 
Join Date: Nov 2007
Location: Grand Rapids, MI
Posts: 10,180
Quote:
Originally Posted by HEATHEN 730 View Post
Mine fits
Are you running the orange FST intakes (that require the spacers)?

I can't use a filter like the RU-2920 because I have to be able to fit my nitrous nozzles under the filter. I am planning on setting up similar to what RPM has set up on his.

...
'04 KFX800
DSC 12:1 Pistons w/ Stg 2 cams, Ported Heads, 36mm carbs, Muzzy Super Pro, Dual MTX-L, VFJ Stg 3 Spidermod Clutch & Adj. Weights, +8 Swing Arm, Elka Shocks, 24" 14-paddle Staggered SLS Ripper paddles, BOSS NOSS 40-shot

'04 KFX730
Custom 84mm 12:1 JE Pistons w/ FST Stg 2 cams, Muzzy Super Pro, UPP Crossover Intakes, 8* Timing Key, Elka Shocks, +4 Swing Arm Extension, 24" 10-paddle Skat-Trak Extremes

'04 KFX730
Wiseco 84mm 11.5:1 Pistons w/ Fundy Trail/Race cams, Muzzy Super Pro, Crossover Intakes, 6* Timing Key, Works front & Elka Rear Shocks, +4 Swing Arm Extension, 24" 9-paddle Skat-Trak Extremes

'05 BF730 SRA

'04 Prairie 700
...
...
twyztid is offline  
post #5 of 8 Old 03-06-2012, 03:22 PM
Senior Member
Feedback Score: 0 reviews
 
diggin riggin's Avatar
 
Join Date: Apr 2010
Location: Augusta, GA
Posts: 1,526
Quote:
Originally Posted by twyztid View Post
Quote:
Originally Posted by HEATHEN 730 View Post
Mine fits
Are you running the orange FST intakes (that require the spacers)?

I can't use a filter like the RU-2920 because I have to be able to fit my nitrous nozzles under the filter. I am planning on setting up similar to what RPM has set up on his.
I'm interested to see what works for you as I'll be running nitrous soon. How far do the nozzles go into the filter?



Prairie 730
KFX FST 820
diggin riggin is offline  
post #6 of 8 Old 03-06-2012, 09:24 PM
Senior Member
Feedback Score: 6 reviews
 
HEATHEN 730's Avatar
 
Join Date: Jun 2004
Location: Michigan
Posts: 8,165
Quote:
Originally Posted by twyztid View Post
Quote:
Originally Posted by HEATHEN 730 View Post
Mine fits
Are you running the orange FST intakes (that require the spacers)?

I can't use a filter like the RU-2920 because I have to be able to fit my nitrous nozzles under the filter. I am planning on setting up similar to what RPM has set up on his.
Yes sir

2004 KFX730
2005 KFX700
HEATHEN 730 is offline  
post #7 of 8 Old 03-06-2012, 09:31 PM Thread Starter
Premium Member
Feedback Score: 24 reviews
 
twyztid's Avatar
 
Join Date: Nov 2007
Location: Grand Rapids, MI
Posts: 10,180
Quote:
Originally Posted by HEATHEN 730 View Post
Quote:
Originally Posted by twyztid View Post
Quote:
Originally Posted by HEATHEN 730 View Post
Mine fits
Are you running the orange FST intakes (that require the spacers)?
Yes sir
And you are running a GYTR filter, right?

...
'04 KFX800
DSC 12:1 Pistons w/ Stg 2 cams, Ported Heads, 36mm carbs, Muzzy Super Pro, Dual MTX-L, VFJ Stg 3 Spidermod Clutch & Adj. Weights, +8 Swing Arm, Elka Shocks, 24" 14-paddle Staggered SLS Ripper paddles, BOSS NOSS 40-shot

'04 KFX730
Custom 84mm 12:1 JE Pistons w/ FST Stg 2 cams, Muzzy Super Pro, UPP Crossover Intakes, 8* Timing Key, Elka Shocks, +4 Swing Arm Extension, 24" 10-paddle Skat-Trak Extremes

'04 KFX730
Wiseco 84mm 11.5:1 Pistons w/ Fundy Trail/Race cams, Muzzy Super Pro, Crossover Intakes, 6* Timing Key, Works front & Elka Rear Shocks, +4 Swing Arm Extension, 24" 9-paddle Skat-Trak Extremes

'05 BF730 SRA

'04 Prairie 700
...
...
twyztid is offline  
post #8 of 8 Old 03-07-2012, 08:52 PM
Senior Member
Feedback Score: 6 reviews
 
HEATHEN 730's Avatar
 
Join Date: Jun 2004
Location: Michigan
Posts: 8,165
Correct

2004 KFX730
2005 KFX700
HEATHEN 730 is offline  
Reply

  Lower Navigation
Go Back   Kawasaki ATV Forum > Kawasaki ATV Performance / Maintenance / Technical > Kawasaki KFX700 V-Force

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki ATV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
36mm K&N filter $35 750brett For Sale 1 11-28-2011 02:52 PM
k&n air filter with mikuni 36mm carb? NewMojave250 Kawasaki Mojave/Lakota 0 10-25-2011 08:14 PM
36mm intake gaskets??? moodykfx Kawasaki KFX700 V-Force 2 03-07-2011 06:51 PM
LTB 36mm carb air filter (GYTR) 05-BF-750 Wanted 11 11-20-2009 11:17 PM
36mm carb filter # vtprairie03 Kawasaki KFX700 V-Force 8 02-27-2009 11:47 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome