Originally Posted by mtimesplitter167 View Post
Originally Posted by defenestrator View Post
Sorry i have 1" spacers but i put 1 1/2" in my post.
Yes they are standard springs.
-Are your front tires sticking out about 2" outside the wheel well?>>Yes
-Are your rear tires still just about flush with the wheel wells?>>might be sticking out about 1"
I will be doing some kind of universal fender flares.
Thanks for the info. My set-up is similar to yours. Highlifter, 1.5" rear spacers, 1" front spacers.
I'm going to get some new wheels (14s) and Tires (27"), so your info will help with some decisions. Greatly appreciated.
Highlifter does not have wheel spacers 4/156 12mmx1.25. You would have to buy this nut to hold the spacer on the hub.
Then you would have to buy 12mmx1.50 polaris nuts to hold the wheel on the spacer..
I went with the moose spacers but are out of 1"spacers, for the mule it comes with the open ended 12mmx1.25 nuts
then when you buy wheels you order nuts for the mule.This is the wheel nut i bought.
2018 MULE PRO FXR
High lifter,lift kit
Tusk Warthog 29x11x14
STI HD6 Alloy Radiant Red
Air intake snorkeled
Volt meter/USB charge ports
oil pressure gauge
Back up lights
Spare tire mount(Home made)
EPI clutch kit
Fan override switch
Gates Carbon 42C4266-belt
Kobalt tool box=Lows #67697
Factory UTV A-Arm Guards