Search Results for ‘400’

Hey everyone, I have high hopes that someone out there can help me. I bought a lemon of a quad and recently thought I was finally getting to the light at the end of the tunnel. I took it all apart cause of a bad head gasket. Re-used the rings and piston and honed the cylinder. I followed a...

I have a KFX 400 that will start and idle, but when you give it gas it starts back firing badly. I have put a big bore kit in. Put new valves and shims in the head. Replaced the carburetor. Triple checked the timing. I replaced the generator, voltage regulator, and a new AGM battery. I am unsure...

working on a 97 prarie 400 for a buddy. It needs a carb but is discontinued. Anyone else done a swap from another year model? Please help!!!

Hey all, just got a "new to me" 2005 prairie 400 4x4 today. I am very very new to this world, but I am excited. I will generally use this ATV for my small farm, and of course some off road fun;) Had a big question. When i bought this, today... I didn't see that the radiator was in BAD shape...

I have a 2007 KFX400. I've replaced the battery, spark plug, and cleaned the carb. Problem is, it won't start with the starter. Sometimes , if I pump the throttle for a while, I can get it to go, but it acts like it's not getting fuel. If I push start it, it will start without exception, as soon...

I have an 03 kfx 400 ran fine until last weekend just stalled and hasn't started since I replaced the plug cleaned the carb jets work fine the carb is just flooding out and not going to the motor it actually seems like it's pushing it into the intake box and not the motor any advice would be...

My buddy has a 2001 kawasaki prairie 400 automatic 2x4. He bought it off of someone else, after the owner let it sit for about 3 months. First thing we did when he got it was clean the carb just because I knew it would be dirty and it ran but wouldn't idle. Well come to find out it was sucking...

hey, im lookin for some handguards for my bike just wonderin one some good ones would be?? also any metal mulish monster or just monster graphics kit? thankks!!

My cam chain/timing chain is ticking. It still has the stock tensioner. Would cleaning the tensioner do anything or is it time for a new hotcams kit? :D

Ok so I bought this 2004 kfx 400 and it needed a new clutch cable so I put one on there and it had been working fine. Recently though the bikes clutch seemed like it was not engaging all the way and even with the clutch pulled in the bike still had some movement when u hit the gas. Now you can't...

Hello I really need some help finding a used rear brake rotor hub for a 2003 kfx 400... I have been searching everywhere and could not find....if anyone is parting out a 2003 kfx 400 please help... I live in Miami..... I recently ordered a 2003 ltz 400 hub but it was different

Is it possible to swap a 400 4x4 rear differential for 300 4x4 on a 1995. Bought a pair of 1995 bayou 400 4x4. One is complete, runs and plan on flipping it. It also came with a "parts" atv that is practically complete minus the rear differential. Seems to be difficult to find a complete...

I have a prairie 400 with Motosport 14 in wheels and 26 in Moto MTCs i would like to know the best clutch spring setup for this kind of tires it seems like mine just doesnt wanna get up and go like it should..... i dont wanna do any mods now just springs or a good setup for it ... let me know...

Alright, when I drive my kfx wide open for about 30 seconds it wants to cut out but if you let off it will drive normal again (it's like the bowl is running out of gas). Or if I ride it hard around the trails it will sputter, bog and die. It will start back up again, but only with the choke...

Hello everyone, my name is Trent. I'm 17 years old & I ride a KFX 400 currently with full Yoshi exhaust, holeshot tires, pro armor nerf bars, and MSR handlebars. I have a few places I ride frequently on the weekends and occasionally myself and a few buddies will go to Badlands Offroad Park or...

So i run in sand pits along with faster xc trails and everyone i ride with has 450's and 700r's, but i have no problem keeping up, but i would really like to have some more low end power in second gear, i am bone stock besides my sprocket in the front. i dropped down to a 13tooth and made a huge...

A couple Friends of mine and my self were a bit curious if we could salavege my busted silencer. With a few trusty tools(sawsall,chopsaw,hammer,Flat screwdiver,hand riveter) and about 3hours, we managed it. wasnt to hard and saved a ton of money. Im not sure how hard metal silencers would be to...

On my kfx 400, I hear a kind of screeching or grinding noise.. I think it's coming from the engine area. When I shift gears, it is like a short grinding noise and when I hit the throttle more the noise gets worse. Also, sometimes when I'm stopped and take off with it revved pretty good it kind...

So my chain is getting pretty stretched and is at the end of its tightening, so I was going to take a link or two off.... When I went to look for the link connector (or whatever you call that link of the chain that can be taken off)... I couldn't find it... So is there no link connector on kfx...

So my 06 kfx400 has never given me a bit of trouble, over the weekend i was riding some local trails and about an hour into it cut out on a hill climb. I thought i fouled a plug so i had to run full choke and couldnt give it ANY throttle or it would die. i limped her home, replaced the plug and...