Kawasaki ATV Forum banner

650

  1. Kawasaki Brute Force/Prairie/Bayou
    Im sure this has posted a million times but after two days of searching the site i cant find the answer.My 03 650 losses power randomly.one minute it will be riding fine then the next it falls flat on its face and starts popping back thru the front carb.i have had the carbs synched,new...
  2. Kawasaki Brute Force/Prairie/Bayou
    Hello all, new to the forum. I have a 2005 Brute force 650 that I recently picked up for $800. Dont know anything about it other then it lost compression. I just recently rebuilt the top end. I started it up and it fired fine. I let it warm up and then went to drive it and it will not...
  3. Kawasaki Brute Force/Prairie/Bayou
    Hi there, new to the forum and kind of lost with what's happening. My brother swamped the ATV about 2 years ago. Said he changed all fluids and plugs. It's been sitting since and I figured I would try going for a ride. Well it doesn't run the greatest now! I bought a carb rebuild kit and am...
  4. nFLOW Motorsports
    nFlow offers complete remanufactured Kawasaki Prairie 650 crate engines! Engine are assembled with precision, using stringent operating procedures. We offer free shipping* on our remanufactured engines located inside the 48 continuous USA states. We offer a 90-day limited warranty. All nFLOW...
  5. nFLOW Motorsports
    nFlow offers complete remanufactured Kawasaki Brute Force 650 crate engines! Engine are assembled with precision, using stringent operating procedures. We offer free shipping* on our remanufactured engines located inside the 48 continuous USA states. We offer a 90-day limited warranty. All...
  6. Kawasaki Brute Force/Prairie/Bayou
    Hey guys, Purchased a 06 650 about 10 months ago after getting my son a quad for Christmas. It worked fine until about 2 months ago. I noticed what sounded like a clunk/binding sound up near the front. I have taken to 4 different shops (2 local mom and pop type and 2 major dealer in our area)...
  7. Kawasaki Brute Force/Prairie/Bayou
    Does anyone know of the torque spec for the pinion nut that keeps ur bearing tight as well the tool or what it looks like? also if anyone knows hows to take the stupid nut off the sxle to get the bearing out, would be great. Any replys would be awesome! oh ya my brute is the solid axle version.
  8. Kawasaki Brute Force/Prairie/Bayou
    Hello everyone, first time posting. I just got 2003 prairie 650 that wouldn't idle. pulled and cleaned the carbs which were very dirty, after reassembly the bike starts and idles fine however when its given gas it will only reach 35-40 and surges faster slower around there. I pulled the vacuum...
  9. Kawasaki Brute Force/Prairie/Bayou
    Hey guys I was wondering if anyone would have a list of cross reference oils that would work besides the kawasaki rear diff oil. Thanks all replies are greatly appreciated :D
  10. Kawasaki Brute Force/Prairie/Bayou
    Hey has anyone ever put/changed there headlights on there kawi and made em green? I seen a vid on youtube with a 550 grizzly and buddy made his headlights green. Any info/help or advice would rock. Thanks!
  11. Kawasaki Brute Force/Prairie/Bayou
    Anyone have a part blow up of the rear end? Trying to find out what seals go where after breaking my rear axle. Thanks =)
  12. Kawasaki Brute Force/Prairie/Bayou
    okay, i have a 2006 Brute Force 650. the tires on the back read (12 x 12.00 x 12) the tires on the front read (10 x 12.00 x 12) The bike has an HMF muffler, when i release the throttle, it shoots fire and pops. also, sometimes when i start it after stopping, it may take just a second to start...
  13. Kawasaki Brute Force/Prairie/Bayou
    Hey guys i have an 03 prarie 650 that has been sitting for about 4 years. Always ran decent before i put it away. Now i cant get it started. When i pull the plugs out and ground them to check for spark they only spark once each time i hit the start button. even if i keep turning it over they...
  14. Kawasaki Brute Force/Prairie/Bayou
    Hey guys this is my first time on here I have been having alot of issues looking for an aftermarket exhaust for my 2003 650 prairie. No sites will give me any solid info on a muffler that will fit. It's a slip on muffler. I'm not looking for anything in particular just something loud, sounds...
  15. Kawasaki Brute Force/Prairie/Bayou
    Hi I need to buy a new 4x4 acuator for my 2002 kvf 650 prairie because the one I have now is fubared. I have tried rebuilding it and everything, but no luck. Do you have anything I could possible check out for problems? If not, where can I buy a new one? Preferably for cheap, because I hear that...
  16. Kawasaki Brute Force/Prairie/Bayou
    So I have a 2002 Kawasaki kvf, and the 4x4 does not work. It recently blew a head, so I pulled out the motor and got it fixed. (4x4 worked before that happened) so once I got the motor back it and it ran all good, the belt had problems and I went into limp mode. I got all that fixed, but my 4x4...
  17. Kawasaki Brute Force/Prairie/Bayou
    Hey Yall We bought a kawi brute 650 in 2009 and rode it for 1200 kms before it was trashed in an accident. After the accident the front diff seized and the engine started smoking bad. Long story short the rider hit a deactivation bump on a logging road too quickly and it flipped end over end...
  18. Kawasaki Brute Force/Prairie/Bayou
    Ok so I got an 08 brute force 650 SRA. Last week I got into a deep hole and long story short the brute cut off with the exhaust under water and now it won't start. I picked it up on end to drain it, pulled the plugs and turned it over to get the water out, changed the oil, and drained the carb...
  19. Kawasaki KFX700 V-Force
    i am in desperate need of a shop manual for my 09 kawasaki bf 650 sra, if someone could please help me id be very appreciative, thanks
  20. Kawasaki Brute Force/Prairie/Bayou
    Been bringing my 02 P650 back from the dead. Upgraded to the 03 airbox with twin air filter, Napa hose mod, crossover intakes, dynatec box, HMF slip on Penland exhaust with ceramic coated pipes (factory front pipe). I am at 500ft above sea level and am currently jetted at 145 front and 148...
Top