Kawasaki ATV Forum banner
cams
1-4 of 4 Results
  1. New Member Introductions
    Hello all new to the page and to the 700. I purchased the quad for a great price cause it wasn’t running right. Pulled the air filter off gave it a good cleaning and it ran like a champ. Rode it all last season with no problems. Quad came with hmf duals and kn filter installed with around 145...
  2. Kawasaki KFX450/KFX400
    Hi, I have a 2004 kfx400 and wanting to put a vertex 94mm big bore kit with hotrods +4mm crank and I'm thinking stage 1 hotcams camshafts, is the anything else I should do? Also i will be rejetting the carby does any one know what jets I should start with?
  3. Kawasaki Mojave/Lakota
    i have an 85 USMC klr250 motor for sale the odo on the bike said 250 miles i havent taken it apart yet i dont wanna crack the gaskets i did take the valve cover off and i swapped the cams and rockers (i needed em ) so i put some old cams in there with ground lobes and rockers beside that the...
  4. Kawasaki Brute Force/Prairie/Bayou
    I am fairly new to this site, but the main reason i joined was because of this, I have worked for a local ATV dealership for serveral years as the head mechainc, over the years I have rebuilt countless brute force engines due to spun rod bearings, I have also done several of my own, (I own 4...
1-4 of 4 Results
Top