Kawasaki ATV Forum banner
head
1-8 of 8 Results
  1. Kawasaki Brute Force/Prairie/Bayou
    i have a big problem my brute broke a valve and embedded it into the piston. im on a budget of a high school student. do i need to go ahead and replace the rod bearing from the impact or not. i know i need a new rear head do i need cam too? what would cause my valve to snap like that?
  2. Kawasaki Brute Force/Prairie/Bayou
    It seems like as I search on eBay for cylinder heads for Praries, there are only rear heads but no front. Is there something to this? Thanks
  3. Kawasaki Mojave/Lakota
    Where to begin??? I recently purchased the atv non running, just got it up and running to find out that coolant is mixing with the oil. I have had the side cover off to fix an issue with the kick starter, are there any seals inside that cover where oil/coolant could potentially mix?? I...
  4. Kawasaki Mojave/Lakota
    i have an 85 USMC klr250 motor for sale the odo on the bike said 250 miles i havent taken it apart yet i dont wanna crack the gaskets i did take the valve cover off and i swapped the cams and rockers (i needed em ) so i put some old cams in there with ground lobes and rockers beside that the...
  5. Kawasaki KFX450/KFX400
    Can anyone tell me exactly what the hole on the left side of the head is for? I'm working on my cusion's KFX400 and when I start it up and let it warm up to operating temp. You can hear it and see it start bubbling something out of the hole. I'm assuming it's anti-freeze. What would cause this...
  6. For Sale
    Pair of amr brute force or teryx 750 heads for sale. The have extensive porting and chamber work, +4 titanium intake valves, +4 stainless exhaust valves, complete with guides, seals, double springs, retainers, ect. Ready to run have not been ran all new valves and parts. $1500.00 Can email or...
  7. Kawasaki Brute Force/Prairie/Bayou
    anybody out there ever swap 650BF/700KVF (sra) engine parts if so just curious what will work and what will not, have a 650 with a good crank and a 700 with a good top end just curious if anyone ever tried anything like this
  8. For Sale
    Up for sale are a few items from the garage- thanks for looking (see pics below) 1) Cylinder head from 03 KFX 400. In great shape: journals are good as well as mating surfaces. Comes 1/2 loaded (intakes are in but ex not). I have 1 of the ex valves and all of the hardware for both (springs...
1-8 of 8 Results
Top