Kawasaki ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Everything Else
    Hi all, Im attempting to read the engine serial number on the engine but struggling to read it. Could anybody that has a "1997 KL220A" please advise me on the numbers? This website doesnt list them unfortunatly - Kawasaki Starting Frame VIN Number and Engine Serial Numbers | AtvManual...
  2. Cow Trails

    With a little help from our friends...
  3. Kawasaki Brute Force/Prairie/Bayou
    Hiya all, i have recently acquired a klf300 with no spark and when I connect a power source the neutral doesn't come on and no power seems to get anywhere, what could this be? cheers
  4. New Member Introductions
    Hi I have a 1995 Kawasaki KLF300C 4x4 which is going through plugs like mad, i can probably start is 9 times before the spark goes orange and weak and won't start, put a new plug in it and fires straight up. Any ideas where my problem lies? Thanks in advance
  5. Everything Else
    last week it was running like shit and sputtering then i found out the plug that goes on the ignition coil was loose. i fix it then it was running really good, it sat for a week and i started it up today it started first pull but whenever i push the throttle just a little bit at stops running. i...
  6. New Member Introductions
    Hey Y'all, I do Small engine repair and am currently caring for a 2002 KLF 220 that my sons league uses to maintain the fields here in Newark, CA. It has an exhaust leak, Oil leaks, flat tire and a noise in the top end. I cleaned the carb and fixed the exhaust leak with a new nut that was...
  7. Wanted
    Hi all Desperate for a crankshaft and con-rod complete for a KLF300 c 4x4 2001 model with the con rod attached. Any rescuers out there?!
  8. Kawasaki Brute Force/Prairie/Bayou
    hi i have a kawasaki bayou 220 what runs but keeps cutting out, i have put a new cdi on it and new barrel and needle in the carb after rebuilding the top end and cleaned the engine, it starts after a lot of pulls and got a great spark and compression but does not stay running it starts runs for...
1-8 of 8 Results