Kawasaki ATV Forum banner

kvf650

  1. Kawasaki KFX700 V-Force
    Please search and join the Facebook group kawie riders
  2. Kawasaki Brute Force/Prairie/Bayou
    This is going to be a strange one for you guys so here goes. When I purchase this atv I was told it was a 700 but after investigating I discovered the 2003 only came in 650. The engine ran good but super rich. Black smoke and the plugs fouled. I ordered a jet rebuild kit from outlaw racing...
  3. Kawasaki Brute Force/Prairie/Bayou
    I have had this quad for a few months now was running when got it but was rough. Then all of a sudden the quad started to stop after about 15 mins of running it would turn over after this but would not start for about an hour or so i brought this quad to a person who calls him a mechanic and he...
  4. Kawasaki Brute Force/Prairie/Bayou
    Hi I have just recently bought a 2009 kvf650 it's been out of action for 2 years. I've got it to turn over but won't start. I have a single spark on each plug when removed and earthed to the chassis The roll over sensor is working, all voltages correct from it. I've drained the carbies and put...
  5. Tips/Help
    Can anyone tell me if a motor out of a 03 kawasaki prairie 650 will fit in my 06 brute force 650 sra. Will every all the wire harness plug up for a smooth swap out. I bought this brute that had a motor full of water and the motor is going take 4k to fix. Found a prairie motor online.
  6. Kawasaki Brute Force/Prairie/Bayou
    This is my first thread so you guys take it easy. I have worked on several kvf's and am currently working on a 2002 650. I made the mistake of tearing out the airbox, carb, and removing the hoses and cables. I have pretty much got everything put back in its place except for a couple of hoses...
  7. Kawasaki Brute Force/Prairie/Bayou
    I have a 2002 KVF650 and noticed that it has a very slow engine oil leak. I took off the front drive propeller and found the leak to be at the seal at the base of the engine housing where the front drive propeller connects to. Does the engine have to be removed for this seal to be replaced or...
Top