Search Results for ‘problem’

I have a 2018 pro fix mule , no problems until I added a 2inch lift . Right front axel keeps popping out. 3 axels later removed lift still have axle popping out, I think at this point it’s damaged the front diff. Has anyone ever had this problem? At the end of my rope with this problem . Thanks...

Awhile back like 2 years ago I was drinking at a bonfire with my buddies, they said "hey let's go ride around" (btw this was at night) anyways I got on my 450 without a helmet, which I wore every single time I got on that monster. But ig not this time of course. So I was turning off my dirt road...

As i was driving back from work on my 2007 kawasaki brute force 750, i could smell like burning rubber, as i slowed down to make a turn i heard a loud bang which sounded like it came from the front of the bike. the bike wasn't shaking or seemed any different on the rest of my ride home. have no...

Hi.i have a 2008 kawasaki prairie 360 4x4 and I just got it on a trade. It runs fine at idle but when it gets up to about 10 mph give or take it starts to spit and sputter like your in reverse without pushing the override button. But it don't matter weather your in neutral, reverse, high, or low...

Hi guys, I'm new to the site and really hoping that you guys can help me out. I have a 09 brute 750. The quad is Rad relocated and fully header back Muzzy exhaust. K&n air filter. Rest is stock. I have a "lull" at 1/2 to wot. I've read for hours online and tried everything I've found...

so my 2004 kfx 400 was running bad, spittin and sputterin. the spark plug cap corroded and lost connection. Quad sat for a month in the garage, then i got the cap and wire to get connection but still wouldnt start. then I checked the oil and it was way too full. then took out the bolt on...

Forum, It seems like a lot of individuals experience this but no one ever completes the thread with a fix. I have a early 90's (1994 maybe) Bayou 220 that has not run for 2 yrs. Acts the same today as it did then. As of today I have rebuilt the carb (cleaned and new injectors, needle...

So I should have posted this earlier but this winter I got the mojave out to play in the snow and so me and my brother could pull each other on sleds. It hasn't been starting good at all for a while, in fact it has to be pull started because it just will not kick start. But after we got it...

I've been trying to figure out the problem now for a couple months...It runs good in low gear- but in high gear it only goes roughly the same top speed as it does in low gear (maybe 15 or 20 mph). Here's the run down... It's a 2003 prairie 360 4x4. When I bought it, it was smoking bad so got a...

My 2006 Brute Force 650 can only get to 59mph. I have 27's swamplites in the front, and 29's in the back. overall the machine weighs stock 604 pounds, the guy I bought it from said he rejetted it with bigger jets, but the only thing to come from that is cranking problems. Can someone please...

Hello everyone... I have an 86 Kawasaki Bayou KLF300A (Technically only the frame is the 300A model, I suspect the engine is different.) I've put a new carb on it back in the spring of last year... One day it just stopped running and I tried and tried to get it to start it and it wouldn't...

I have a 2009 brute force 750 and it was running fine but I went to get a turtle trap today and lost power the tires wouldn't spin and it would have little bursts of power. It's not in limP mode I checked and it's not the fuel pump what could it be.

I'm not quite sure what the problem is, but when I start my Mojave, (doesn't have any trouble starting) I put the choke on full and it runs just fine, slight exhaust popping when it is still warming up. Then when I take the choke off it idles at a normal speed and then slowly dies down and shuts...

Hello, this is my first post on this site, but looking at other threads, you guys have helped me out alot, so once more? :lol: I bought a 1988 Mojave in really rough shape not running, bought a new carb because the old one was leaking gas into the motor and pressurizing the crankcase. The new...

Hey guys I just bought a 2001 Kawasaki Bayou 220 for me and my wife to ride. We rode around last weekend and everything was fine, but then when we jumped on it today I noticed that it felt like the throttle was sticking. When I was in netural it would start revving up like I was holding the...

Can anyone tell me exactly what the hole on the left side of the head is for? I'm working on my cusion's KFX400 and when I start it up and let it warm up to operating temp. You can hear it and see it start bubbling something out of the hole. I'm assuming it's anti-freeze. What would cause this...

G'day. I've got a KLF300 (unknown year) and it has a few problems 1. The cam chain tensioner seems faulty. The rod will not go in unless i remove the retainer bearing. I've replaced the rod and retainer with genuine parts and greased them and it still won't work. Is it possible to remove the...

My 2006 kfx 400 has been making all sorts of clinking, clunking ,and all sorts of noise and i need to no what it is. It sounds like it is coming from the rear end of my quad. So if you can help please help me.

Can someone dumb it down for me as to what i can do to fix my problem. The 4wd and 2wd light blinks back and forth. I fixed the belt and reset the Limp mode. Quad runs good but the light blinks back and forth. What could be wrong here. thanks. someone dumb it down for me. Thanks

Can anyone tell me what the vent tube is for on 4wheel actuator? 03 Prairie and many other kaw models :confused::confused:....