Search Results for ‘tecate 4’

Does anyone on here know of a replacement hub from a different machine that will fit these tecates? Mines a 88 and I have almost a half inch of travel forwards and backwards. Or possibly is there a company that rebuilds these hubs?

Hello, I’m looking to sell my 1988 Kawasaki Tecate 4. I live in San Diego, CA All original plastics and decals Aftermarket pipe Twist throttle Just put brand new tires on it in December 2021, and have only taken it out twice since then All stock engine I have a full set of spare tires for it...

Hello, I’m looking to sell my 1988 Kawasaki Tecate 4. I live in San Diego, CA All original plastics and decals Aftermarket pipe Twist throttle Just put brand new tires on it in December 2021, and have only taken it out twice since then All stock engine I have a full set of spare tires for it...

LOOKING FOR A MINT TECATE 4. I LIVE IN NY. SO HOPING TO FIND ONE CLOSE. SERIOUS BUYER 716-444-7984 -DAVE

I would like to know how to advance the timing on the stator? Also how far to advance it to get peak performance out of the engine? I am using Sunoco standard 110 for fuel, and I am trail riding/racing. A lot of hill climbing and Corning so I would like to increase acceleration at lower rpms

Hi I'm new to the forum. And I have got 2 Tecate 4 project's to post questions about soon, need some help and advice with. Thanks

Nice 87 tecate 4 still has org tires and seat cover both in great shape never any motor work done at all,fmf silencer and mo-pro twist throttle is the only after market parts, motor pulls strong,BUT the stator went out this summer,looking for $ 1,500 as-is, or i get a stator from ricky"s in the...

Hey guys, I'm Brandon. New to the forum. Thanks in advance for the great info. New bike today so I needed to join. Just picked up an 88 t4! Excited to restore one of my high school dream bikes.

Does anyone have a +4 swingarm they are willing to get rid of, or know any place i could buy one? Also looking for some +4 or +2 a arms! Any info welcomed. Thanks!!

Hello! This is Actually the first forum I've ever joined,but since I just acquired a 1987 tecate 4 project,I figured this might be a great way to get started. Im Going to be looking for a lot of parts as well as info along the way,so hopefully this will be helpful in my journey. I've resorted...

Hey guys! Im new to the group.. Really interested in getting a nice T4. Let me know whats out there. Cash in hand! Thank You

Kawasaki Tecate 4 racing quad with tilt trailer. This thing is bad fast. GPS said 76 mph. Add ons and performance parts: FMF Gold Series Fatty Pipe FMF Silencer/Spark Arrester* Uni Filter Mikuni carb Wiseco piston LA sleeved Boyesen Reeds ORI clutch/ maxima fluid Dura-Blue back axle New back...

I tried to put a pwk 39 on my tecate yesterday. It fit fine in the intake boot but i could not get in to fit in the air filter boot. And if i did heat the boot up and somehow get it on i would fear it would come off while im riding. So my question is will another boot off a different bike/quad...

hey guys, i have a few more questions about my new tecate. i know that the ball joints are bad but it has +2 funco a arms and im not sure if these have the same ball joints as stock, it also has the funco anti bump steer kit and an anti vibe steering stem was this a whole kit or is the steering...

what type of a arms are these? i know the picture is small but its the best one i have. also i found that they still make or have extra plastics that you can buy i checked two different websites, they both had them for about the same price i would add a link but it wont let me due to the amount...

hello guys, new to the site. to my knowlage the stock tacate 4 have about 37 hp and i have come across a tecate with a 310 big bore that i am thinking about trading a trx350x hybrid for. just wondering about the hp difference between stock and the big bore 310 kit. thanks in advance[/FONT]

I am in need of kawasaki blue side covers for a 88 tecate,please let me know if u have them

For sale 1987 tec-4, fresh top end, new swing arm bearings. Average plastics no major cracks or anything, all stock except for fmf pipe/silencer and boysen rad valve assembly. The bad news, took it out after top end rebuild and am finding metal shavings in the trans oil, pm for pics and phone...