Search Results for ‘tecate’

Does anyone on here know of a replacement hub from a different machine that will fit these tecates? Mines a 88 and I have almost a half inch of travel forwards and backwards. Or possibly is there a company that rebuilds these hubs?

LOOKING FOR A MINT TECATE 4. I LIVE IN NY. SO HOPING TO FIND ONE CLOSE. SERIOUS BUYER 716-444-7984 -DAVE

I feel like I was over due for me to make an account here. I've been a 3 wheeler junky for over 12 years now. My first machine was a 1983 Kawasaki KLT 200c. I've got more than my share of atvs in a salvage yard state lol. The 2 that I've been focusing on are my Yamaha blaster(Most people...

Does anyone have a +4 swingarm they are willing to get rid of, or know any place i could buy one? Also looking for some +4 or +2 a arms! Any info welcomed. Thanks!!

Hey guys! Im new to the group.. Really interested in getting a nice T4. Let me know whats out there. Cash in hand! Thank You

I tried to put a pwk 39 on my tecate yesterday. It fit fine in the intake boot but i could not get in to fit in the air filter boot. And if i did heat the boot up and somehow get it on i would fear it would come off while im riding. So my question is will another boot off a different bike/quad...

so being that crashed my tecate and shattered my collar bone in 3 places im probably out of commission for this year. so im planning on fabbing up a +2 swinger for my 88 tecate to accept trx450 carrier and some better shock geometry. i see that walsh rc and leagers are putting cr500 and crf450...

Hi all Posted on here a long time ago and got some good leads for where to start, (also have posted to 3ww) Have taken it apart now that it has warmed up and work has slowed down. Need some thoughts. 84 kawi Tecate trike. No spark. Tranny, clutch, frame, rad, all look good. I pulled...

i have an 88 tecate that i am rebuilding and i was porting the jug today and discovered one of my power valves was stuck:mad:. after getting them out of the cylinder i found that they were both broken. one just broken in half but the other was broken in half and all of the gears were stripped...

Hi, I live in Calgary Canada and bought the trike as a winter project. I did know it didn't have spark when I bought it, but must admit wasn't up on how hard it is to come by parts for it. Had some Honda trikes a while back and was hoping to see what a two stroke with full suspension can put...

I have an 87 Tecate 4 that is in need of some love:wub::( its been siting since 2000 and I'm ready to part it out. i wish i could keep the green machine around but its just to expensive and hard to find parts:(. the engine has a 2mm bore kit nikasil and all. it also has a Keihin 40mm carburetor...

'86 Tecate 3 *updated* Westcoast swinger and Durablue axle I have an '86 Tecate racing 3 wheeler in amazing shape. No cracks or tears. 250cc bored .30 over, extended swing arm, wide axle. Also have several sets of tires, sand/paddle, ice, flat track, and regular knobbies. Many extra parts also...

Hey guys I have a 1984 tecate 3 I think it's the "a" model, I tore it completely apart and sold the ignition,back shock and reed cage and reeds out of it. the rest of the bike it basically there. the plastic is red and faded but the color could probally be pulled out of it. the seat has the rips...

I have an 88 T4 in excellent condition that needs a good home. See add from the classified section. Asking $2800.00 or best offer. For those that remember these 2 stroke quads, they are screamin fast, super light and excellent desert and dune quads. I'm selling this quad due to lack of use...

Asking $2800.00 or best offer. For those that remember these 2 stroke quads, they are screamin fast, super light and excellent desert and dune quads. I'm selling this quad due to lack of use. It starts easily, runs very strong and is in excellent condition. All the original plastics are in...

I wanna know what setup will work best for my 87 tecate 4. I go to the track every now and then but mainly ride dirt roads and drag race. I just rebuilt the top end. Right now I have a keihin 34mm carb. I was wondering what difference it would make if i put a keihin 36mm carb on or if I...

Just found this site looking for a Tecate project bike. I look forward to meeting some new people and hopefully finding me a good project bike. I am in the business of manufacturing MX Graphics & Off Road Wraps so maybe I will meet a few clients here as well.

I have 3 KX500 motors / engines 2001,2001, and 2000. All run and shift great. I only search for the best. I've blown away the 450's at Glamis on my 97 KX500, and had my share of fun but the 45 years under my belt is slowing my butt down. There was a guy at Glamis that rode a dam wheelie at 80...

i recently traded for a 1985 tecate 3 wheeler could any1 tell me about them because this is the first tecate ive owned and i want to restore it also does any1 know any good sites to buy parts from?

I have an 87 T4 for sale, its mostly stock and in great shape. Bike has Razr's on the rear and nerf bars, everything else is stock. Front plastics are in excellent shape and come with an extra set of excellent plastics. The rear plastic is decent with one stitched crack. The wheels are painted...