Kawasaki ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Kawasaki Brute Force/Prairie/Bayou
    Okay, so here is my issue. I just bought this quad and got it started after I cleaned the carb and recoil starter but it died out almost immediately. I've done timing before so I checked it and it was off. I loosened the chain tensioner and then took the chain off of the cam gear to adjust the...
  2. Kawasaki Brute Force/Prairie/Bayou
    I have a 96 bayou 300 that I just did a top end build. Starts and runs awesome and when it gets warm I have a valve ticking. I tried valve adjustment from the low gap to high gap. Same results. I have proper oil and level.... I did have the valve seats reground the machinist said the cam and...
  3. Kawasaki Brute Force/Prairie/Bayou
    Hi guys. I have an ATV KAWASAKI Bayou 220 - 2001, and he presents sound off on adjusting the valves. I have the caliber of clearances and have the setting values​​, but I have a question: to make the adjustment the piston must be at PMS? How do I stop the piston in this position? The two valves...
  4. Kawasaki Mojave/Lakota
    I have a 1987 mojave that I recently resurrected for the second time. I was having idling issues I could not work out, so it sat for 7 years. After completely going through the carb the idling issues still persist. Greg at CWR suggesested I check my valve clearance and for cam wear, which I...
  5. Kawasaki KFX700 V-Force
    I have a 2006 KFX700 with about 250 hours, for the last year about every 10 to 15 hours the valves need to be adjusted or it will not start. Any ideas as to why so many valve adjustments?
1-6 of 6 Results