Kawasaki ATV Forum banner

wiring

  1. 1996 bayou 220 wiring issue

    Everything Else
    Hey i had bought an 1996 Kawasaki bayou 220 that wouldnt produce a spark. I have replaced the cdi box the ignition coil the spark plug and the pickup coil. Still no spark. I stripped the whole thing down and tested all the wires. The only thing i found was this. There is 2 wires running to the...
  2. mojave wiring harnesses

    Kawasaki Mojave/Lakota
    I was recently given three mojaves one was in working condition the other the kid started to redo and lost intrest in it. The third is a parts quad. When putting back together the one I noticed it was missing the voltage regulator. So I bought one on ebay. However when I went to install it I...
  3. Wont start!!!!

    Kawasaki Brute Force/Prairie/Bayou
    hey whats going on i'm new here and have some questions i have a 2009 brute force 750. i owned the quad sense new. i had two bent valves on the rear head had them replaced the shop says all the timing is fine. i get the quad all back together and it wont start first wouldn't crank i had a bad...
  4. Tried everything, can't figure out grounding issue

    Kawasaki Brute Force/Prairie/Bayou
    I think I found out why my kill switch and electric start button dont work.. I unhooked the battery from ground and touched the brown wire (supplying power to the light switch, kill switch & electric start) and the negative cable at the battery (but not connected to the battery for testing...
  5. Wiring Question

    Kawasaki Brute Force/Prairie/Bayou
    I believe I have a electrical problem, I was cleaning mud and dirt out of some connectors and now I'm not getting the neutral/Reverse light, I'm thinking the reason is there is probably a bad connection from where I took the connectors apart, the only connector that I could see that had anything...
  6. wiring HELP!!

    Kawasaki KFX700 V-Force
    Hey guys im new to this forum and this is my first post and the why i made an account is because i need your help. I bought led bars to put in the stock light location and want to run them using the stock light switch that has high and low but im unsure what wires do what. There are three wires...
  7. 1999 Prairie 300 Wiring question??

    Kawasaki Brute Force/Prairie/Bayou
    Hello all, I am currently working on a 99 Prairie 300?? anyway I'v found some wires disconected that I can't identify! They are strange color codes on them. The wires "End" at the Pull start (Recoil) case and can't go too far. All of them are disconnected and hanging free so here is what I...
  8. Wiring (I need help)

    Kawasaki KFX450/KFX400
    I just recently posted about nerf bars earlier but now I have a question I could really use some great advise on. First, I bought my 450r brand new in 2009 I have rode it really hard but the last two years I have been plagued with electrical issues first it was blowing fuses and then finally...
  9. KLF 300C coil issues...

    Kawasaki Brute Force/Prairie/Bayou
    Can anyone tell me how the coil should be wired? i just bought a new coil but the old one was not wired in (just in a parts bin) i bought the Bayou for 100.00. and the wiring harness was a mess. any help would be awesome.
  10. 2004 KFX 400 electrical problems. PLEASE HELP!

    Kawasaki KFX450/KFX400
    Okay. 2 weeks ago I went riding in the snow for about an hour. I came back in, let my 2004 KFX 400 sit for about an hour and half and then went out to ride again. When I turned the key, nothing lit up. I assumed the battery could have been dead because of the cold weather, but it was fine. I...
Top