[tomalaina]

hey guys i need help...
i think this is a 2 part problem.
1. i put bad gas in the bike and when i can get it to start it will not stay running unless it is at full choke. if i take the choke off it will not stay running. it runs with the choke at full like it should without. i pumped out most of the gas and put fresh gas in but still has the same problem. (i know its the gas cause my mower has a problem running now too - same gas)
2. the dash and lights blink on & off and when i put any load on the battery it kills the dash screen completely. the battery reads 12.8 without it running. i checked wires and everything looks ok. i have not changed anything - (battery, etc.) before i bring it in to a shop to get raped what should i look for. Thanks in advance.

 

[novass]

pull your carbs clean them every jet etc make sure do 1 carb at a time so you dont get the main jets mixed up.charge your battery its low. had to do the same on my 02 praire and 05 brute force .both had bad gas put seafoam in gas tank when you put new gas in tank

 

[novass]

gas

make sure you get all the old gas out ,its the ethanol in the gas bad stuff tars up carbs