2016 brute 750 code 31 ?????

2012 Views 3 Replies 3 Participants Last post by Tyler metcalf, 14 d ago

Jason16BruteForce750

Discussion Starter · Oct 16, 2019 (Edited)

Have a 2016 Brute Force 750 fuel injected. Very low miles. Ran perfectly then one day I went to start it and it would not start. Thought it was the fuel pump replace the fuel pump and it's not getting fuel. Did a self- diagnostic and a code 31 came up. What can cause this? Can a bad battery cause this code? I know that the ECU is telling the fuel pump to shut down.

Save

1 - 4 of 4 Posts

NMKAWIERIDER

· #2 · Oct 16, 2019

Code 31 has always been a vehicle down sensor or roll-over sensor. It can be a connection or the sensor itself. That will kill the fuel pump. A 10 second search with Google told me that. Could have save you from buying a fuel pump.

Diagnosing Error Codes: EFI Brute Force | High Lifter Forums

Ok, this is taken virtually straight out of the service manual for the 08. I've edited the info for clarity. As you'll soon see, Kawi didn't decide to make this very simple for us.... The self-diagnosis system has two modes. User Mode The ECU notifies the rider of troubles in DFI syste...

forum.highlifter.com