Kawasaki ATV Forum banner

Front Diff Differential

1874 Views 9 Replies 3 Participants Last post by  dbierman
I've got a front diff for a prairie. It also fits the brutes.

It has damage to the case and the 4x4 gears but the ring and pinion and all the bearing inside there are good.

My son put it into 4x4 with the back wheels spinning and it broke a tooth in the 4x4 engagement section and sent it out the side.

$250 shipped inside the lower 48.
1 - 10 of 10 Posts
Have you split it open to see what is still good. Let me know if the center case and the small bevel gears are any good.
have the 4x4 actuator on it still?
No 4x4 actuator, it broke also.
Have you split it open to see what is still good. Let me know if the center case and the small bevel gears are any good.
I have not opened the center section it is good. The 4 wheeler was running fine when I took it out.

There wasn't any shavings in the oil that I drained from it and it turns freely.
I can send email pics, this computer is giving me a hard time, I'll try to upload them from home in the morning.
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top