Kawasaki ATV Forum banner

1 - 20 of 70 Posts

·
Registered
Joined
·
1,033 Posts
Discussion Starter · #1 · (Edited)
Here is a bigger list! I don't have all of the prices figure out yet, but i am working on it.

I will have a LOT of stuff. Full swingarm/rear-end with 1" extension and the high gear set - with axle and hubs, and extended shock mount.
http://i2.photobucket.com/albums/y17/ckedd/Kawieriders/IMGP1368.jpg
http://i2.photobucket.com/albums/y17/ckedd/Kawieriders/IMGP1369.jpg

New set of fully ported heads, one used set of full ported head with S/S o-ring grooves machine in. Muzzy exhaust with bung for LM-1 probe. The best set of 36 mm carbs set up and space apart to fit on FST big intake manifolds, air cleaner set up right with a Boondockers 50 HP nos shot, and the full nos set up to go with it. 1 sets of 24" extreme paddles, with 9 paddles, on Douglas wheels.

Digatron EGT and lap times (so you can get your 300' times)
My long and short wheel bar set-up http://s2.photobucket.com/albums/y17/ckedd/Long%20Wheelie%20Bar/
http://s2.photobucket.com/albums/y17/ckedd/Small%20Wheelie%20Bar/

YFZ 450 oil can set up.
BF659 stator set up (2 pounds lighter mass)
VFORCH JOHN stage 4 clutch with beige spring and Dalton kit, secondary with the Purple blue spring two belts.
2-4 CDI's
Stock radiator,
New stock shocks.
OEM gas tank
Full set of Alum skid plates.
Nurf bars.
New set of 88mm jugs, with 12.5:1 pistons
FST stage 3 cams 7 hours on them.
Heavy duty rods
Various wheels

Well that's all for now, but there will be more :eek:

Corey
 

·
Registered
Joined
·
1,033 Posts
Discussion Starter · #3 ·
how much for pistons jugs and cams?
Let me figure that out, and I will get back to you. The cams are still in the new set of ported heads, want them also? I also have a bunch of head gaskets. The metal ones and the original type. The metal ones require two base gaskets for piston clearance.
 

·
Registered
Joined
·
151 Posts
PM sent
 

·
Premium Member
Joined
·
160 Posts
how much for the muzzy
 

·
Registered
Joined
·
1,998 Posts
What wheels do you have?
 

·
Registered
Joined
·
4,802 Posts
what kind of nerfs and skids? pics?
 

·
Registered
Joined
·
7,129 Posts
how much for pistons jugs and cams?
Let me figure that out, and I will get back to you. The cams are still in the new set of ported heads, want them also? I also have a bunch of head gaskets. The metal ones and the original type. The metal ones require two base gaskets for piston clearance.

Wow!!! Long time no see!! How and where have you been?? B)
 

·
Registered
Joined
·
304 Posts
need price on wheelie bars.

thanks
 

·
Registered
Joined
·
248 Posts
how much for the heavy duty rods to 71901?
 

·
Registered
Joined
·
477 Posts
Stage 4 primary price shipped 38769?
 

·
Registered
Joined
·
3,843 Posts
PM sent on the +1 swinger with high gear set.
 

·
Registered
Joined
·
1,934 Posts
pm me a price on the heads!
 

·
Registered
Joined
·
1,033 Posts
Discussion Starter · #17 ·

·
Registered
Joined
·
1,033 Posts
Discussion Starter · #18 ·

·
Registered
Joined
·
1,033 Posts
Discussion Starter · #19 ·
how much for pistons jugs and cams?
Let me figure that out, and I will get back to you. The cams are still in the new set of ported heads, want them also? I also have a bunch of head gaskets. The metal ones and the original type. The metal ones require two base gaskets for piston clearance.

Wow!!! Long time no see!! How and where have you been?? B)
It has been along time, and I am good. Going to work on a new Busa build.. How have you been?

Corey
 

·
Registered
Joined
·
1,033 Posts
Discussion Starter · #20 ·
1 - 20 of 70 Posts
Top