Dibs on the billet gas cap 
Parting a fresh bike with all the fixins!!
Here's the deal, I have decided to part out the red 330 Tecate. Everything on this bike is BRAND NEW. Here is a rundown of what it has, i plan to offer it up and once i have commitments for 1/2 to 2/3 of the parts, i will take the money and tear down the bike. there are a lot of choice parts here so don't delay on this one as they will go quick. Every bushing, bearing, ball joint is new on this bike. every engine bearing and seal is also new. This bike has many trick parts. Lots of aftermarket parts here, very hard to find goodies here. Every part on this bike is polished, powder coated or chromed.
Fresh 330 long rod by ILR Performance(full dune port, just under 60hp) Long rod rebuilt crank, teflon coated piston, New power valves, Rockhound Motorsports 10mm reed spacer, big carb intake, polished jug and head. electronics are also included
40mm Lectron carb
K&N air filter
+1" aluminum wheel spacers(3 sets)
Dirt tires on black powdercoated wheels
paddles on douglas aluminum
14/42 PBI sprockets and red oring chain
+2" Rockhound Motorsports steering stem
Carbon tech reeds
lots of chrome, pegs, kicker, shifter, brake pedal, axle nuts, shock keepers, front bumper, etc...
Here is a list of all that is left, i will update it daily:
carb
Engine
Pc brake lever and clutch perch/lever
+2" RHMS steering stem(w/anodized red aftermarket upper bar clamp)
front aluminum wheel spacers 1"(3 sets available)
shifter(chrome)
kicker(chrome)
front bumper(chrome)
chain and sprocket set PBI and oring
88 aarms w/new balljoints and pivot bearings/seals
powdercoated spindles
front hubs with brake discs and new bearings
pegs(chrome)
headlight and mechanism
harness with components
front fender support PC
radiator
front PC 87 shocks with chrome keepers
tank and petcock
pc sprocket hub
pc brake hub
R brake assembly
front brake assembly
pc brake stay
PC rear wheel hubs 4 0n 110
pc rear hubs 4 on 156
hoses
taillight
bars pc
white maier rears with very small bubble
white factory fronts
white factory hood
black sides(painted)
air box w/k&n
Frame Pc red with title(and subframe)
white rad shrouds
Rear fender support
Pm me me with what you want/need, and i will get back to you with prices. I will not be tearing the bike down or accepting money until i have a commitment of 1/2 of the parts.
Fresh 330 long rod by ILR Performance(full dune port, just under 60hp) Long rod rebuilt crank, teflon coated piston, New power valves, Rockhound Motorsports 10mm reed spacer, big carb intake, polished jug and head. electronics are also included
40mm Lectron carb
K&N air filter
+1" aluminum wheel spacers(3 sets)
Dirt tires on black powdercoated wheels
paddles on douglas aluminum
14/42 PBI sprockets and red oring chain
+2" Rockhound Motorsports steering stem
Carbon tech reeds
lots of chrome, pegs, kicker, shifter, brake pedal, axle nuts, shock keepers, front bumper, etc...
Here is a list of all that is left, i will update it daily:
carb
Engine
Pc brake lever and clutch perch/lever
+2" RHMS steering stem(w/anodized red aftermarket upper bar clamp)
front aluminum wheel spacers 1"(3 sets available)
shifter(chrome)
kicker(chrome)
front bumper(chrome)
chain and sprocket set PBI and oring
88 aarms w/new balljoints and pivot bearings/seals
powdercoated spindles
front hubs with brake discs and new bearings
pegs(chrome)
headlight and mechanism
harness with components
front fender support PC
radiator
front PC 87 shocks with chrome keepers
tank and petcock
pc sprocket hub
pc brake hub
R brake assembly
front brake assembly
pc brake stay
PC rear wheel hubs 4 0n 110
pc rear hubs 4 on 156
hoses
taillight
bars pc
white maier rears with very small bubble
white factory fronts
white factory hood
black sides(painted)
air box w/k&n
Frame Pc red with title(and subframe)
white rad shrouds
Rear fender support
Pm me me with what you want/need, and i will get back to you with prices. I will not be tearing the bike down or accepting money until i have a commitment of 1/2 of the parts.
1 - 20 of 36 Posts
On my BB at the moment, pm me with the cost of the axle, billet gas cap if you have another one. Interested in the front shocks but price will depond on whether I can commit. Will reply quick once I get prices. Do you have a pic of the levers, can I find on your site.
Seperately, I need a rear sprocket hub (think that's what's called) broke mine yesterday trying to get the axle flange off (still didn't get it off) it's like it's welded on. Ah, yes, guess I need a new flange too.
pm sent, here are some pics
http://i55.photobucket.com/albums/g135/rockhoundoffroad/RED T-4/yea013.jpg
http://i55.photobucket.com/albums/g135/rockhoundoffroad/RED T-4/yea017.jpg
http://i55.photobucket.com/albums/g135/rockhoundoffroad/RED T-4/yea002.jpg
http://i55.photobucket.com/albums/g135/rockhoundoffroad/RED T-4/snowmobile085.jpg
http://i55.photobucket.com/albums/g135/rockhoundoffroad/RED T-4/yea010.jpg
http://i55.photobucket.com/albums/g135/rockhoundoffroad/RED T-4/sethsbuild036.jpg
http://i55.photobucket.com/albums/g135/rockhoundoffroad/RED T-4/sethsbuild032.jpg
http://i55.photobucket.com/albums/g135/rockhoundoffroad/RED T-4/yea013.jpg
http://i55.photobucket.com/albums/g135/rockhoundoffroad/RED T-4/yea017.jpg
http://i55.photobucket.com/albums/g135/rockhoundoffroad/RED T-4/yea002.jpg
http://i55.photobucket.com/albums/g135/rockhoundoffroad/RED T-4/snowmobile085.jpg
http://i55.photobucket.com/albums/g135/rockhoundoffroad/RED T-4/yea010.jpg
http://i55.photobucket.com/albums/g135/rockhoundoffroad/RED T-4/sethsbuild036.jpg
http://i55.photobucket.com/albums/g135/rockhoundoffroad/RED T-4/sethsbuild032.jpg
I'll add the names next to the parts that who has dibbs on so you guys know if she's going down those parts are spoken for...
Damn it! I was hoping to get the gas cap. If D's changes his mine I'm on it. Lol.
I wanna be second in line for the axle
chrome, pegs, kicker, shifter, brake pedal, front bumper
and the aftermarket grab bar
chrome, pegs, kicker, shifter, brake pedal, front bumper
and the aftermarket grab bar
Can you send me a pm with the motor, frame, and subframe price
Damn it! I was hoping to get the gas cap. If D's changes his mine I'm on it. Lol.
Sorry
no mind changing here.
Before i quote the motor price to anyone, first i want to lay out what a motor of this caliber takes to build
top end, with head machine and porting with teflon coated piston 700.00
rebuilt long rod crank 250.00
all bearings and seal for lower end 300.00
labor to split cases 300.00
new power valves 100.00
new stator and flywheel 250.00
carbon tech reeds, reed spacer and big carb intake boot 150.00
The cases are powdercoated red, the side covers are powdercoated black, the head and jug are polished. it would cost you 2050 to build this same motor, not including any shipping. of course, that's with labor, but not including the motor itself. i am selling the motor for 1800.00 shipped. Or, if it doesn't sell, i'll shrink wrap it and leave it in my trailer as a spare.
top end, with head machine and porting with teflon coated piston 700.00
rebuilt long rod crank 250.00
all bearings and seal for lower end 300.00
labor to split cases 300.00
new power valves 100.00
new stator and flywheel 250.00
carbon tech reeds, reed spacer and big carb intake boot 150.00
The cases are powdercoated red, the side covers are powdercoated black, the head and jug are polished. it would cost you 2050 to build this same motor, not including any shipping. of course, that's with labor, but not including the motor itself. i am selling the motor for 1800.00 shipped. Or, if it doesn't sell, i'll shrink wrap it and leave it in my trailer as a spare.
Hey Mike, I still need a pipe for the big bore remember.... lol
For those of you who are himming and hawing, hurry and make up your minds, i have multiple guys asking about the same parts. i'm going to start taking the offers where they confirm they want the parts.
I have received enough interest in these parts to begin disassembly, for those of you who have commited to parts, send some money to [email protected] and be sure to put in the notes what you are buying and your kawieriders username. Parts will start shipping on monday
Here is a list of all that is left, i will update it daily:
carb
***Klemms pipe<<<<<>>>>>3WHLNUT
Billet rear bearing Carrier
Engine
seat(black gripper)
Pc brake lever and clutch perch/lever
+2" RHMS steering stem(w/anodized red aftermarket upper bar clamp)
aftermarket tie rods
front aluminum wheel spacers 1"(3 sets available)
shifter(chrome)
kicker(chrome)
front bumper(chrome)
chain and sprocket set PBI and oring
Powdercoated swinger w/new bearings<<<<<>>>>>brose434
88 aarms w/new balljoints and pivot bearings/seals
powdercoated spindles
front hubs with brake discs and new bearings
***billet gas cap<<<<<>>>>>D'sTecate
rebuilt rear shock
powdercoated twist throttle with cable
pegs(chrome)
headlight and mechanism
harness with components
front fender support PC
radiator
front PC 87 shocks with chrome keepers
tank and petcock
pc sprocket hub
pc brake hub
R brake assembly
front brake assembly
pc brake stay
***PC rear wheel hubs 4 0n 110<<<<<>>>>> 3WHLNUT
pc rear hubs 4 on 156
aftermarket grab bar
hoses
taillight
bars pc
white maier rears with very small bubble
white factory fronts
white factory hood
black sides(painted)
air box w/k&n
Frame Pc red with title(and subframe)
white rad shrouds
stainless bolt kit
Rear fender support
RHMS Stainless Rear brake disc.
If it's on this list, it's available. Hurry guys, this stuff is going fast
carb
***Klemms pipe<<<<<>>>>>3WHLNUT
Billet rear bearing Carrier
Engine
seat(black gripper)
Pc brake lever and clutch perch/lever
+2" RHMS steering stem(w/anodized red aftermarket upper bar clamp)
aftermarket tie rods
front aluminum wheel spacers 1"(3 sets available)
shifter(chrome)
kicker(chrome)
front bumper(chrome)
chain and sprocket set PBI and oring
Powdercoated swinger w/new bearings<<<<<>>>>>brose434
88 aarms w/new balljoints and pivot bearings/seals
powdercoated spindles
front hubs with brake discs and new bearings
***billet gas cap<<<<<>>>>>D'sTecate
rebuilt rear shock
powdercoated twist throttle with cable
pegs(chrome)
headlight and mechanism
harness with components
front fender support PC
radiator
front PC 87 shocks with chrome keepers
tank and petcock
pc sprocket hub
pc brake hub
R brake assembly
front brake assembly
pc brake stay
***PC rear wheel hubs 4 0n 110<<<<<>>>>> 3WHLNUT
pc rear hubs 4 on 156
aftermarket grab bar
hoses
taillight
bars pc
white maier rears with very small bubble
white factory fronts
white factory hood
black sides(painted)
air box w/k&n
Frame Pc red with title(and subframe)
white rad shrouds
stainless bolt kit
Rear fender support
RHMS Stainless Rear brake disc.
If it's on this list, it's available. Hurry guys, this stuff is going fast
I want the folowing chrome items pegs, kicker, shifter, brake pedal, front bumper
and the aftermarket grab bar
and the aftermarket grab bar
I will send payment to your paypal when I get out of work tonight.
im lookin for a complete rear brake set up from start to finish and possibly an engine.. if you have any of this stuff maybe shoot me a PM, thanks
Pm sent, Hurry guys, off to ebay soon.
Here is a list of all that is left, i will update it daily:
40mm Lectron Powerjet Carb 185.00
***Klemms pipe<<<<<>>>>>3WHLNUT
Billet rear bearing Carrier 75.00
Engine 1800.00
seat(black gripper) 65.00
Pc brake lever and clutch perch/lever 30.00
+2" RHMS steering stem(w/anodized red aftermarket upper bar clamp) 135.00
front aluminum wheel spacers 1"(3 sets available) 50.00 per set
shifter(chrome) 40.00
kicker(chrome) 75.00
front bumper(chrome) 75.00
chain and sprocket set PBI and oring 100.00
Powdercoated swinger w/new bearings<<<<<>>>>>brose434
88 aarms w/new balljoints and pivot bearings/seals 125.00
powdercoated spindles 85.00
front hubs with brake discs and new bearings 60.00
rebuilt rear shock 160.00
powdercoated twist throttle with cable 25.00
pegs(chrome) 75.00
headlight and mechanism 60.00
harness with components 125.00
front fender support PC 40.00
radiator 30.00
front PC 87 shocks with chrome keepers 75.00
tank and petcock 40.00
pc sprocket hub 85.00
pc brake hub 85.00
R brake assembly 75.00
front brake assembly 60.00
pc brake stay 15.00
PC rear wheel hubs 4 0n 110 40.00
pc rear hubs 4 on 156 40.00
aftermarket grab bar 25.00
hoses 20.00
taillight 25.00
bars pc 25.00
white maier rears with very small bubble 175.00
white factory fronts 150.00
white factory hood 25.00
black sides(painted) 85.00
air box w/k&n 45.00
Frame Pc red with title(and subframe) 275.00
white rad shrouds 125.00
stainless bolt kit 75.00
Rear fender support 45.00
If it's on this list, it's available. Hurry guys, this stuff is going fast. For those of you who haven't paid for your confirmed parts, this afternoon they will come available again. I want this stuff gone so jump on this stuff. There are still a lot of aftermarket parts left. Don't let all the Ebay vultures have all these bitchin parts!! Prices are shipped continental U.S.
__________________
40mm Lectron Powerjet Carb 185.00
***Klemms pipe<<<<<>>>>>3WHLNUT
Billet rear bearing Carrier 75.00
Engine 1800.00
seat(black gripper) 65.00
Pc brake lever and clutch perch/lever 30.00
+2" RHMS steering stem(w/anodized red aftermarket upper bar clamp) 135.00
front aluminum wheel spacers 1"(3 sets available) 50.00 per set
shifter(chrome) 40.00
kicker(chrome) 75.00
front bumper(chrome) 75.00
chain and sprocket set PBI and oring 100.00
Powdercoated swinger w/new bearings<<<<<>>>>>brose434
88 aarms w/new balljoints and pivot bearings/seals 125.00
powdercoated spindles 85.00
front hubs with brake discs and new bearings 60.00
rebuilt rear shock 160.00
powdercoated twist throttle with cable 25.00
pegs(chrome) 75.00
headlight and mechanism 60.00
harness with components 125.00
front fender support PC 40.00
radiator 30.00
front PC 87 shocks with chrome keepers 75.00
tank and petcock 40.00
pc sprocket hub 85.00
pc brake hub 85.00
R brake assembly 75.00
front brake assembly 60.00
pc brake stay 15.00
PC rear wheel hubs 4 0n 110 40.00
pc rear hubs 4 on 156 40.00
aftermarket grab bar 25.00
hoses 20.00
taillight 25.00
bars pc 25.00
white maier rears with very small bubble 175.00
white factory fronts 150.00
white factory hood 25.00
black sides(painted) 85.00
air box w/k&n 45.00
Frame Pc red with title(and subframe) 275.00
white rad shrouds 125.00
stainless bolt kit 75.00
Rear fender support 45.00
If it's on this list, it's available. Hurry guys, this stuff is going fast. For those of you who haven't paid for your confirmed parts, this afternoon they will come available again. I want this stuff gone so jump on this stuff. There are still a lot of aftermarket parts left. Don't let all the Ebay vultures have all these bitchin parts!! Prices are shipped continental U.S.
__________________
1 - 20 of 36 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Kawasaki ATV Forum
KawieRiders.com is the largest Kawasaki ATV owner's forum with information for the Kawasaki KFX700, Brute Force, Prairie, Bayou, Mojave, Lakota and older model Kawasaki ATV's!
Full Forum Listing
Top Contributors this Month
View All
NMKAWIERIDER
37 Replies
Swanny52
12 Replies
auburn6887
8 Replies
Recommended Communities
