Kawasaki ATV Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
75 Posts
I farted around with my 700 Prairie and simply removed the intake cover which made it run like xxxx. You thought the snorkle install was a PITA? Ha, wait till you have to get to the carbs half a dozen times to jet it right. Its probably to lean now. Like Auburn said, clean the plugs or replace. Do a few speed runs in the bad running area, shut it down immediately after the run(no idling around) and pull a plug to see what it looks like. Black and sooty is rich and whitish ashy means to lean and report back. Remember 0 to 1/8 throttle is the pilot circuit, 1/8 up to 3/4 is the needle setting and these are not clipped for adjustment,must use washer type shimming and WFO is the main circuit basically.
 
1 - 1 of 1 Posts
Top