Kawasaki ATV Forum banner

DS650 cams?

5.4K views 6 replies 5 participants last post by  kujo  
#1 ·
does anyone know of a good set of cams for a DS650 besides Ron Woods? a young fella down the road just got ripped off on one and now he needs atleast a top end rebuild.. he wants to order a 720 bbk, port the head and put a big carb on, but leave the stock cams.. i told him not to waste his money unless hes putting cams in too.. so i have him convinced, i just have to find some cams..
 
#3 ·
Check with Glenn,I think he's done some work on them :hmm:
 
#5 ·
OMWracing.com aka Mr.HP Eric Oldam 270-334-3331 OR
TheBomracing.com aka The BOMB Jeff Ross 573-778-2542


I've heard bad things about the 720 kits. My best advice would be to would be to contact both of the gentelmen above and see which one best suits your needs. Both are top notch builders and can get into the 70rwhp range and stay stock bore and stroke and a whole lot more if you wanna go larger. Being a DS be ready to spend some cash though.
 
#6 ·
I have an 06 DS650 that I put OMW4 cams in from Eric oldham and they really woke it up with the high compression piston. It tries to pull wheellies through 3rd gear with my 22 in 10 paddle haulers. I have been told that there is not a Better builder than Eric for the DS. He is on the nomercyracing.org forum, you can contact him on there too. :tup: